Reck Jaguar mit hydraulischer Schwenkeinrichtung

The mixer on offer is a RECK Jaguar 4.6 m Turbo with Ø 101 mm mixer tube and Ø 500 mm propeller without support foot
The slurry mixer shown is a Jaguar 6.6 m Turbo with Ø 101 mm mixer tube and Ø 600 mm propeller with long support foot
Purchase price € 5.090,--

Description:
The cranked swing-in arm on the Jaguar model offers great advantages for use in small pit openings (from 60 cm ø). It is attached to the tractor pivot point (lower and upper link). An additional hydraulic cylinder is used to adjust the inclination of the slurry mixer and swivel it in: smooth, simple and independent of the

The mixer on offer is a RECK Jaguar 4.6 m Turbo with Ø 101 mm mixer tube and Ø 500 mm propeller without support foot The slurry mixer shown is a Jaguar 6.6 m Turbo with Ø 101 mm mixer tube and Ø 600 mm propeller with long support foot Purchase price € 5.090,-- Description: The cranked swing-in arm on the Jaguar model offers great advantages for use in small pit openings (from 60 cm ø). It is attached to the tractor pivot point (lower and upper link). An additional hydraulic cylinder is used to adjust the inclination of the slurry mixer and swivel it in: smooth, simple and independent of the often inaccurate tractor hydraulics. The two universal joints of the standard PTO shaft are angled evenly and comfortably by the hydraulic cylinder and the tractor hydraulics. This ensures low-wear operation with an inexpensive standard PTO shaft. Total mixer lengths are available from 4.6 m to 7.6 m. At a glance ◾For pit openings from 60 cm ø ◾Completely hot-dip galvanized ◾Gull-resistant bearing of the mixer shaft (5-8 x bearing / 4-7 x with wooden plain bearing) ◾Incl. high-performance propeller ◾Mixer lengths from 4.6 m - 7.6 m Areas of application ◾For open and closed deep tanks ◾For slalom systems in combination with sealing frames Several designs in stock and available at any time! Austria-wide delivery included in the price!

The mixer on offer is a RECK Jaguar 4.6 m Turbo with Ø 101 mm mixer tube and Ø 500 mm propeller without support foot The slurry mixer shown is a Jaguar 6.6 m Turbo with Ø 101 mm mixer tube and Ø 600 mm propeller with long support foot Purchase price € 5.090,-- Description: The cranked swing-in arm on the Jaguar model offers great advantages for use in small pit openings (from 60 cm ø). It is attached to the tractor pivot point (lower and upper link). An additional hydraulic cylinder is used to adjust the inclination of the slurry mixer and swivel it in: smooth, simple and independent of the often inaccurate tractor hydraulics. The two universal joints of the standard PTO shaft are angled evenly and comfortably by the hydraulic cylinder and the tractor hydraulics. This ensures low-wear operation with an inexpensive standard PTO shaft. Total mixer lengths are available from 4.6 m to 7.6 m. At a glance ◾For pit openings from 60 cm ø ◾Completely hot-dip galvanized ◾Gull-resistant bearing of the mixer shaft (5-8 x bearing / 4-7 x with wooden plain bearing) ◾Incl. high-performance propeller ◾Mixer lengths from 4.6 m - 7.6 m Areas of application ◾For open and closed deep tanks ◾For slalom systems in combination with sealing frames Several designs in stock and available at any time! Austria-wide delivery included in the price!