Bucher V65h DAF

Odometer reading: 22,187,
Curb weight: 16,000 kg,
First registration: September 27, 2023
________
Engine:
PX-7 engine
6-cylinder diesel engine, 6.7 liters.
Power: 194 kW (264 PS) at 2,300 rpm.
Max. torque: 1,000 Nm at 1,000–1,700 rpm.
Model: LF 260 FA 4x2 truck, 16 metric tons, D0555471
Driven rear axle with mechanical differential lock
Brake system
Exhaust brake
Integration of the function into the Electronic Brake System (EBS).
When activated via the steering wheel switch, the exhaust brake is engaged after the accelerator pedal is released.
Emissions standard: Euro 6
Transmission type: Manual transmission, 6 speedsTransmission: 6-speed manual transmission 6S1000 OD, 6.75–0.78
Wheelbase: 3250 mm
Chassis weight:
Technically permissible chassis weight: 16,000 kg
Cab:
Day Cab with steel bumper, tinted windows, and power windows.
Power-heated main mirrors and wide-angle mirrors.
Cab width: 2,130 mm
Translucent green exterior sun visor above the windshield
Daytime running lights, bumper-mounted lighting units with combined fog light and cornering light functions
Electrically adjustable main mirrors; central locking with exterior light check function includes 2 remote controls and 2 keys with transmitters.
Luxury air-suspension driver’s seat with adjustable damping and pneumatic lumbar support.
Heated seat cushion, integrated headrest.
Three-point seat belt.
Velour seat upholstery.
Armrest on the driver’s seat; manually controlled air conditioning with recirculation function
Communication and driving management: Radio/USB player.
Speaker system with 2 speakers.
Truck phone.
Hands-free kit with SIM card slot (for 2G or 3G networks) and Bluetooth antenna.
Multipoint pairing allows simultaneous operation of two additional cell phones via the steering wheel.
Paint finish:
Cab color: RAL 2011
Standard base equipment:
HGB2 hydrostatic transmission
Max. 1,400 Nm and approx. 340 HP
Mechanical shift transmission mounted in the chassis with integrated hydrostatic drive for
stepless speed control during sweeping operations
Transport speed 0–85 km/h via standard transmission (Cruise control optional)
This drive system allows for stepless control of the sweeping speed in forward
(1–40 km/h) and reverse (1–10 km/h) directions via an electronic accelerator pedal (Easy-Drive).
At the same time, the suction power can be adjusted between
ECO and Max, independent of the travel speed. Fuel tank in the sweeper body, capacity approx. 190 l
Hydraulic fan drive. Hydraulic oil tank 50 l, engine compartment lined with sound-insulating material, fan exhaust vented upward through the hopper extension, stepless electronic turbine adjustment, single hydraulic pump.
Debris hopper:
Debris hopper (with tailgate and screen) and water tank made of 1.4003 chrome steel
Debris hopper gross volume 6.5 m³, debris hopper floor made of chrome-alloyed stainless steel 1.4301. Debris container tilt angle approx. 55 degrees, debris chute made of 1.4003 chrome steel, inspection hatches on the right and left
Dirty water drain via clamp hose and 2-inch drain valve, air intake screen, manually foldable, 2 orange rotating warning lights, mounted on the rear of the debris container; suction pipe flap on the exterior of the container, hydraulically operated; 4-stage safety support, pneumatically operated.
Marker lights on the rear of the container; side marker lights.
Sweeping unit:
Trailed disc brushes
Hydraulically driven disc brushes, steel-tipped disc brushes, diameter 500 mm
Continuously variable speed control for disc brushes. Two guide wheels for suction inlet, wide suction inlet 750 mm, automatic lifting of the sweeping units when reversing,
LED work lights for sweeping unit, debris containment skirt for disc brushes, debris collection on both sides
Roller brush:
Roller brush suspension, towed, swiveling
Brush length 1,300 mm, brush diameter 406 mm with plastic bristles
Hydraulically driven roller brush
Debris containment skirt for roller brush unit
Water system:
Water tank capacity approx. 1,554 l
Water tank made of chrome steel, 1.4003 with

Odometer reading: 22,187, Curb weight: 16,000 kg, First registration: September 27, 2023 ________ Engine: PX-7 engine 6-cylinder diesel engine, 6.7 liters. Power: 194 kW (264 PS) at 2,300 rpm. Max. torque: 1,000 Nm at 1,000–1,700 rpm. Model: LF 260 FA 4x2 truck, 16 metric tons, D0555471 Driven rear axle with mechanical differential lock Brake system Exhaust brake Integration of the function into the Electronic Brake System (EBS). When activated via the steering wheel switch, the exhaust brake is engaged after the accelerator pedal is released. Emissions standard: Euro 6 Transmission type: Manual transmission, 6 speedsTransmission: 6-speed manual transmission 6S1000 OD, 6.75–0.78 Wheelbase: 3250 mm Chassis weight: Technically permissible chassis weight: 16,000 kg Cab: Day Cab with steel bumper, tinted windows, and power windows. Power-heated main mirrors and wide-angle mirrors. Cab width: 2,130 mm Translucent green exterior sun visor above the windshield Daytime running lights, bumper-mounted lighting units with combined fog light and cornering light functions Electrically adjustable main mirrors; central locking with exterior light check function includes 2 remote controls and 2 keys with transmitters. Luxury air-suspension driver’s seat with adjustable damping and pneumatic lumbar support. Heated seat cushion, integrated headrest. Three-point seat belt. Velour seat upholstery. Armrest on the driver’s seat; manually controlled air conditioning with recirculation function Communication and driving management: Radio/USB player. Speaker system with 2 speakers. Truck phone. Hands-free kit with SIM card slot (for 2G or 3G networks) and Bluetooth antenna. Multipoint pairing allows simultaneous operation of two additional cell phones via the steering wheel. Paint finish: Cab color: RAL 2011 Standard base equipment: HGB2 hydrostatic transmission Max. 1,400 Nm and approx. 340 HP Mechanical shift transmission mounted in the chassis with integrated hydrostatic drive for stepless speed control during sweeping operations Transport speed 0–85 km/h via standard transmission (Cruise control optional) This drive system allows for stepless control of the sweeping speed in forward (1–40 km/h) and reverse (1–10 km/h) directions via an electronic accelerator pedal (Easy-Drive). At the same time, the suction power can be adjusted between ECO and Max, independent of the travel speed. Fuel tank in the sweeper body, capacity approx. 190 l Hydraulic fan drive. Hydraulic oil tank 50 l, engine compartment lined with sound-insulating material, fan exhaust vented upward through the hopper extension, stepless electronic turbine adjustment, single hydraulic pump. Debris hopper: Debris hopper (with tailgate and screen) and water tank made of 1.4003 chrome steel Debris hopper gross volume 6.5 m³, debris hopper floor made of chrome-alloyed stainless steel 1.4301. Debris container tilt angle approx. 55 degrees, debris chute made of 1.4003 chrome steel, inspection hatches on the right and left Dirty water drain via clamp hose and 2-inch drain valve, air intake screen, manually foldable, 2 orange rotating warning lights, mounted on the rear of the debris container; suction pipe flap on the exterior of the container, hydraulically operated; 4-stage safety support, pneumatically operated. Marker lights on the rear of the container; side marker lights. Sweeping unit: Trailed disc brushes Hydraulically driven disc brushes, steel-tipped disc brushes, diameter 500 mm Continuously variable speed control for disc brushes. Two guide wheels for suction inlet, wide suction inlet 750 mm, automatic lifting of the sweeping units when reversing, LED work lights for sweeping unit, debris containment skirt for disc brushes, debris collection on both sides Roller brush: Roller brush suspension, towed, swiveling Brush length 1,300 mm, brush diameter 406 mm with plastic bristles Hydraulically driven roller brush Debris containment skirt for roller brush unit Water system: Water tank capacity approx. 1,554 l Water tank made of chrome steel, 1.4003 with coating Water level gauge in the cab Water filling device, Storz C (2"), right side Water pump, hydraulically driven Automatic water shut-off when sweeping units are raised Water blow-out system 4 water tank cleaning ports to remove limescale and any debris Electric water valves in the cab Low-pressure spray bar under the front of the cab (4 nozzles) 2 water nozzles for disc brushes 2 water nozzles for suction chute Instrument panel and control console: Bucher instrument panel, including 7" color display Ergonomic control unit, mounted on the driver’s door, equipped with the main functions Display includes the following functions: water level indicator, fuel gauge, engine speed built-in engine, operating hours, coolant temperature Warning and indicator lights for battery status, rear axle load, built-in engine oil level indicator, air filter contamination, coolant temperature, engine oil pressure gauge; monitoring and control unit for regulating brush contact pressure (brush relief), stepless speed control of the disc brushes, stepless speed control of the auxiliary engine. Electric valves for the water system, operated from the cab. Operation of the debris container functions via a radio remote control from the cab, but also possible from outside. Container tilting mechanism via an electro-hydraulic pump or via the auxiliary engine when in operation. Warning light with audible alarm when the waste container is raised Optional equipment: - Pneumatically raised and lowered air guide screen in the waste container - Vibration device for air guide screen—pneumatically operated - Chain curtain in the debris container, in front of the air guide screen - Water tank connection, Type A coupling, Storz 2 1/2 inches - Wastewater drain screen—with stepped perforations, mounted on the tailgate, enabling more efficient drainage of the debris compartment - Mounting frame on the tailgate for attaching additional equipment - Additional spray nozzles on the rear of the suction inlet - Autolock system—pneumatic locking system - Prevents the sweeping units from sinking in the event of air loss in the chassis - Reinforced support wheels and bearings - for the inter-axle surface suction inlet - Powasave - Contact pressure control for the disc brush, with pressure gauge - Adjustment of disc brush angle via joystick, double-sided—simultaneous sweeping - Simultaneous sweeping on both sides - Variabrush—stepless extension and retraction of the disc brush, double dirt pickup - Stepless speed control of the roller brush - Coated suction inlet, suction pipe, and reinforced baffle plate, rubber-coated - Disc brush # 650 mm, steel bristles - Roller brush # 406 mm with one-piece plastic bristles - Additional low-pressure spray bar in front of the roller brush - Rear suction hose boom, Ø 200 mm, with hydraulic relief and control unit on the handle, plus extension - Pull rope for the boom - Easiclean for easier cleaning of the interior of the debris bin - Flushing system for fan cleaning - Side high-pressure nozzle on the suction inlet, single-sided—for intensive cleaning behind the disc brush (available only with the full Supawash system) - Manual water valves in the cab (Supawash Option 3) - High-pressure washing system (100 bar / 30 L/min) with hand lance and hose reel (15 m hose), nozzle bar on the roller brush and on the suction inlet - Cruise control - Two orange LED rotating beacon lights at the rear - Three white LED work lights (mounted on both sides) - Contour lights at the rear - Tank painted in a standard RAL color: Orange RAL 2011 - Configuration according to the interface specification for the hydrostatic transmission and speedometer calibration for the manual transmission

Odometer reading: 22,187, Curb weight: 16,000 kg, First registration: September 27, 2023 ________ Engine: PX-7 engine 6-cylinder diesel engine, 6.7 liters. Power: 194 kW (264 PS) at 2,300 rpm. Max. torque: 1,000 Nm at 1,000–1,700 rpm. Model: LF 260 FA 4x2 truck, 16 metric tons, D0555471 Driven rear axle with mechanical differential lock Brake system Exhaust brake Integration of the function into the Electronic Brake System (EBS). When activated via the steering wheel switch, the exhaust brake is engaged after the accelerator pedal is released. Emissions standard: Euro 6 Transmission type: Manual transmission, 6 speedsTransmission: 6-speed manual transmission 6S1000 OD, 6.75–0.78 Wheelbase: 3250 mm Chassis weight: Technically permissible chassis weight: 16,000 kg Cab: Day Cab with steel bumper, tinted windows, and power windows. Power-heated main mirrors and wide-angle mirrors. Cab width: 2,130 mm Translucent green exterior sun visor above the windshield Daytime running lights, bumper-mounted lighting units with combined fog light and cornering light functions Electrically adjustable main mirrors; central locking with exterior light check function includes 2 remote controls and 2 keys with transmitters. Luxury air-suspension driver’s seat with adjustable damping and pneumatic lumbar support. Heated seat cushion, integrated headrest. Three-point seat belt. Velour seat upholstery. Armrest on the driver’s seat; manually controlled air conditioning with recirculation function Communication and driving management: Radio/USB player. Speaker system with 2 speakers. Truck phone. Hands-free kit with SIM card slot (for 2G or 3G networks) and Bluetooth antenna. Multipoint pairing allows simultaneous operation of two additional cell phones via the steering wheel. Paint finish: Cab color: RAL 2011 Standard base equipment: HGB2 hydrostatic transmission Max. 1,400 Nm and approx. 340 HP Mechanical shift transmission mounted in the chassis with integrated hydrostatic drive for stepless speed control during sweeping operations Transport speed 0–85 km/h via standard transmission (Cruise control optional) This drive system allows for stepless control of the sweeping speed in forward (1–40 km/h) and reverse (1–10 km/h) directions via an electronic accelerator pedal (Easy-Drive). At the same time, the suction power can be adjusted between ECO and Max, independent of the travel speed. Fuel tank in the sweeper body, capacity approx. 190 l Hydraulic fan drive. Hydraulic oil tank 50 l, engine compartment lined with sound-insulating material, fan exhaust vented upward through the hopper extension, stepless electronic turbine adjustment, single hydraulic pump. Debris hopper: Debris hopper (with tailgate and screen) and water tank made of 1.4003 chrome steel Debris hopper gross volume 6.5 m³, debris hopper floor made of chrome-alloyed stainless steel 1.4301. Debris container tilt angle approx. 55 degrees, debris chute made of 1.4003 chrome steel, inspection hatches on the right and left Dirty water drain via clamp hose and 2-inch drain valve, air intake screen, manually foldable, 2 orange rotating warning lights, mounted on the rear of the debris container; suction pipe flap on the exterior of the container, hydraulically operated; 4-stage safety support, pneumatically operated. Marker lights on the rear of the container; side marker lights. Sweeping unit: Trailed disc brushes Hydraulically driven disc brushes, steel-tipped disc brushes, diameter 500 mm Continuously variable speed control for disc brushes. Two guide wheels for suction inlet, wide suction inlet 750 mm, automatic lifting of the sweeping units when reversing, LED work lights for sweeping unit, debris containment skirt for disc brushes, debris collection on both sides Roller brush: Roller brush suspension, towed, swiveling Brush length 1,300 mm, brush diameter 406 mm with plastic bristles Hydraulically driven roller brush Debris containment skirt for roller brush unit Water system: Water tank capacity approx. 1,554 l Water tank made of chrome steel, 1.4003 with coating Water level gauge in the cab Water filling device, Storz C (2"), right side Water pump, hydraulically driven Automatic water shut-off when sweeping units are raised Water blow-out system 4 water tank cleaning ports to remove limescale and any debris Electric water valves in the cab Low-pressure spray bar under the front of the cab (4 nozzles) 2 water nozzles for disc brushes 2 water nozzles for suction chute Instrument panel and control console: Bucher instrument panel, including 7" color display Ergonomic control unit, mounted on the driver’s door, equipped with the main functions Display includes the following functions: water level indicator, fuel gauge, engine speed built-in engine, operating hours, coolant temperature Warning and indicator lights for battery status, rear axle load, built-in engine oil level indicator, air filter contamination, coolant temperature, engine oil pressure gauge; monitoring and control unit for regulating brush contact pressure (brush relief), stepless speed control of the disc brushes, stepless speed control of the auxiliary engine. Electric valves for the water system, operated from the cab. Operation of the debris container functions via a radio remote control from the cab, but also possible from outside. Container tilting mechanism via an electro-hydraulic pump or via the auxiliary engine when in operation. Warning light with audible alarm when the waste container is raised Optional equipment: - Pneumatically raised and lowered air guide screen in the waste container - Vibration device for air guide screen—pneumatically operated - Chain curtain in the debris container, in front of the air guide screen - Water tank connection, Type A coupling, Storz 2 1/2 inches - Wastewater drain screen—with stepped perforations, mounted on the tailgate, enabling more efficient drainage of the debris compartment - Mounting frame on the tailgate for attaching additional equipment - Additional spray nozzles on the rear of the suction inlet - Autolock system—pneumatic locking system - Prevents the sweeping units from sinking in the event of air loss in the chassis - Reinforced support wheels and bearings - for the inter-axle surface suction inlet - Powasave - Contact pressure control for the disc brush, with pressure gauge - Adjustment of disc brush angle via joystick, double-sided—simultaneous sweeping - Simultaneous sweeping on both sides - Variabrush—stepless extension and retraction of the disc brush, double dirt pickup - Stepless speed control of the roller brush - Coated suction inlet, suction pipe, and reinforced baffle plate, rubber-coated - Disc brush # 650 mm, steel bristles - Roller brush # 406 mm with one-piece plastic bristles - Additional low-pressure spray bar in front of the roller brush - Rear suction hose boom, Ø 200 mm, with hydraulic relief and control unit on the handle, plus extension - Pull rope for the boom - Easiclean for easier cleaning of the interior of the debris bin - Flushing system for fan cleaning - Side high-pressure nozzle on the suction inlet, single-sided—for intensive cleaning behind the disc brush (available only with the full Supawash system) - Manual water valves in the cab (Supawash Option 3) - High-pressure washing system (100 bar / 30 L/min) with hand lance and hose reel (15 m hose), nozzle bar on the roller brush and on the suction inlet - Cruise control - Two orange LED rotating beacon lights at the rear - Three white LED work lights (mounted on both sides) - Contour lights at the rear - Tank painted in a standard RAL color: Orange RAL 2011 - Configuration according to the interface specification for the hydrostatic transmission and speedometer calibration for the manual transmission