Kronos Walvoil SDE030 + HmLine proportional control box

Hydraulic Valve Walvoil SDE030 12/24V with 6 Proportional Sections, Open Center.

Control Boxes 12/24V. We adapt the control fully to the customer's requirements. The number of functions, the method of control (switches, buttons, potentiometers; both returning or not returning to neutral), the type of control (proportional or on/off and floating functions), the voltage (12/24V) and the type of plugs. The arrangement of the functions on the box itself can also be agreed with us.

This kit is configured for the most popular machine settings, supporting up to 6 standard small crane functions. If you require a different dedicated configuration, we can customize it to meet your needs. Please send us a diagram, and we can assist further.

We provide technical support and are readily available via email, whatsup and telephone.

Feel free to contact us at - or - for any inquiries or assistance.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.

--------------------------------------------------------------------------------------------------------------------------------------------------------------

Hydraulic, sectional valve Walvoil SDE030
Technical Data

Nominal flow rating: 30L/min - 7.9 US gpm

Operating pressure (max.) paraller circuit: 250 bar - 3600 psi

Back pressure (max.) outlet port T: 210 bar - 3050 psi / otlet port T with lever control: 30 bar - 435 psi

Internal leakage (max.) A(B)⇒T ∆p = 100 bar - 1450 psi fluid and valve at 40°C - 104°F: 30 cm3/min - 0.85 in3/min

Fluid: Mineral based oil

Fluid temperature with NBR (BUNA-N) seals: from -20°C to 80°C - from -4°F to 176°F

with FPM (VITON) seals: from -20°C to 100°C - from -4°F to 212°F

Viscosity: operating range: from 15 to 75 mm2/s - from 15 to 75 cSt