
- YOM 2022
- 22 m³
Schwarzmayr Landtechnik GmbH - Gampern
4851 Upper Austria
Premium Gold dealer
Year of manufacture | 2025 |
|---|---|
Internal number | 70481 |
Condition | Very good (Class 1) |
Tire dimensions | 710/45R22,5 |
EDV 70481
Tandem universal spreader with 235 trips completed
Chassis
- Chassis made of sturdy structural sections
- Tandem undercarriage with parabolic suspension and BWA axles
- Spring-loaded top hitch with a 40 mm diameter drawbar eye
- 10-metric-ton support jack with 2-speed gearbox; support leg adjustable separately
- 4-wheel air brakes; spindle brake as parking brake
Body
- Steel side walls, 3 mm thick, 1,250 mm high, smooth interior, welded exterior, mesh panel and rubber seal in the front wall
- Load-securing slide gate, opening 1,300 mm, slide gate indicator on the front wall (Optional)
- Hydraulically swiveling rear wall flap
- Two rolling floors with four hardened round steel chains, 14x50 mm (breaking load 24 metric tons per chain strand)
- Steel floor
- Spur gear drive for roller floor with forward and reverse motion
Spreading unit
- Two milling drums with an outer diameter of 550 mm. Spreading unit passage width: 1300 mm
- 1-roll chain for driving the lower milling roller
- 2-disc wide-spreader with a disc diameter of 1000 mm / 4 throwers each
- Oil-bath gearbox with Ø 60 mm shaft / overload clutch / freewheel; spreading table lined with bolted-on
8 mm HARDOX wear plates
Safety devices
- Walterscheid PWE 480 drive shaft with cam-operated clutch and freewheel to protect the drivetrain and milling drums
- Overload clutch to protect the spreading disc assembly
- Freewheels between the spreading disc gearboxes to protect the spreading disc gearboxes
- When equipped with electronic controls: Speed monitoring of the milling drums. If the milling drum speed
EDV 70481 Tandem universal spreader with 235 trips completed Chassis - Chassis made of sturdy structural sections - Tandem undercarriage with parabolic suspension and BWA axles - Spring-loaded top hitch with a 40 mm diameter drawbar eye - 10-metric-ton support jack with 2-speed gearbox; support leg adjustable separately - 4-wheel air brakes; spindle brake as parking brake Body - Steel side walls, 3 mm thick, 1,250 mm high, smooth interior, welded exterior, mesh panel and rubber seal in the front wall - Load-securing slide gate, opening 1,300 mm, slide gate indicator on the front wall (Optional) - Hydraulically swiveling rear wall flap - Two rolling floors with four hardened round steel chains, 14x50 mm (breaking load 24 metric tons per chain strand) - Steel floor - Spur gear drive for roller floor with forward and reverse motion Spreading unit - Two milling drums with an outer diameter of 550 mm. Spreading unit passage width: 1300 mm - 1-roll chain for driving the lower milling roller - 2-disc wide-spreader with a disc diameter of 1000 mm / 4 throwers each - Oil-bath gearbox with Ø 60 mm shaft / overload clutch / freewheel; spreading table lined with bolted-on 8 mm HARDOX wear plates Safety devices - Walterscheid PWE 480 drive shaft with cam-operated clutch and freewheel to protect the drivetrain and milling drums - Overload clutch to protect the spreading disc assembly - Freewheels between the spreading disc gearboxes to protect the spreading disc gearboxes - When equipped with electronic controls: Speed monitoring of the milling drums. If the milling drum speed
EDV 70481 Tandem universal spreader with 235 trips completed Chassis - Chassis made of sturdy structural sections - Tandem undercarriage with parabolic suspension and BWA axles - Spring-loaded top hitch with a 40 mm diameter drawbar eye - 10-metric-ton support jack with 2-speed gearbox; support leg adjustable separately - 4-wheel air brakes; spindle brake as parking brake Body - Steel side walls, 3 mm thick, 1,250 mm high, smooth interior, welded exterior, mesh panel and rubber seal in the front wall - Load-securing slide gate, opening 1,300 mm, slide gate indicator on the front wall (Optional) - Hydraulically swiveling rear wall flap - Two rolling floors with four hardened round steel chains, 14x50 mm (breaking load 24 metric tons per chain strand) - Steel floor - Spur gear drive for roller floor with forward and reverse motion Spreading unit - Two milling drums with an outer diameter of 550 mm. Spreading unit passage width: 1300 mm - 1-roll chain for driving the lower milling roller - 2-disc wide-spreader with a disc diameter of 1000 mm / 4 throwers each - Oil-bath gearbox with Ø 60 mm shaft / overload clutch / freewheel; spreading table lined with bolted-on 8 mm HARDOX wear plates Safety devices - Walterscheid PWE 480 drive shaft with cam-operated clutch and freewheel to protect the drivetrain and milling drums - Overload clutch to protect the spreading disc assembly - Freewheels between the spreading disc gearboxes to protect the spreading disc gearboxes - When equipped with electronic controls: Speed monitoring of the milling drums. If the milling drum speed
Your contact person

Call advisor


Do you have Fertilization and irrigation equipment / Compost/ dung spreaders for sale?
On Landwirt.com you can reach over 545,000 registered users.