Unigrip M + mit Ballenstütze

The Unigrip M+ bale grapple was developed to deliver outstanding performance in dense stacking and efficient bale retrieval.
It is designed for bales with a diameter of 120 to 160 cm.

Its clever construction incorporates numerous unique design features that contribute to the exceptional performance of Quicke’s Unigrips.

Key features include:
• Pivot points: The arms’ pivot points are closely spaced on the main frame, so that when the arms open, their ends point almost straight forward.

• Single-cylinder design: This design allows the arms to move sideways like a parallelogram, enabling one arm to follow the adjacent bale as it moves in and out of the stack.

• Smooth edges: Special care is taken to ensure that no sharp edges or weld seams come into contact with the bale being transported or the adjacent bale in the stack.
• Wide opening: Combined with the other features, this contributes to outstanding performance when stacking and retrieving tightly stacked bales.
The rear frame, to which the hooks are attached, is slightly angled so that most loaders can pick up the bales in the field. In addition, the compact frame design keeps the bale close to the loader, which is particularly important for smaller tractors and loaders in hilly terrain.

Additional features include:
• Arm design: The arms work in conjunction with the main frame to gently push the bale backward, ensuring optimal grip while minimizing compression and preventing damage to the silage wrap.
• Optional valves: The DBV and the load-holding valve reduce pressure on the bale while ensuring a secure grip

The Unigrip M+ bale grapple was developed to deliver outstanding performance in dense stacking and efficient bale retrieval. It is designed for bales with a diameter of 120 to 160 cm. Its clever construction incorporates numerous unique design features that contribute to the exceptional performance of Quicke’s Unigrips. Key features include: • Pivot points: The arms’ pivot points are closely spaced on the main frame, so that when the arms open, their ends point almost straight forward. • Single-cylinder design: This design allows the arms to move sideways like a parallelogram, enabling one arm to follow the adjacent bale as it moves in and out of the stack. • Smooth edges: Special care is taken to ensure that no sharp edges or weld seams come into contact with the bale being transported or the adjacent bale in the stack. • Wide opening: Combined with the other features, this contributes to outstanding performance when stacking and retrieving tightly stacked bales. The rear frame, to which the hooks are attached, is slightly angled so that most loaders can pick up the bales in the field. In addition, the compact frame design keeps the bale close to the loader, which is particularly important for smaller tractors and loaders in hilly terrain. Additional features include: • Arm design: The arms work in conjunction with the main frame to gently push the bale backward, ensuring optimal grip while minimizing compression and preventing damage to the silage wrap. • Optional valves: The DBV and the load-holding valve reduce pressure on the bale while ensuring a secure grip during operation. The load-holding valve is designed for loaders with free return on the third function. Note: The DBV (11256837Q) is required for the load-holding function. • Adjustable rear bale support: This can be adjusted to optimally grip bales of various diameters. As a result, the bale always rests correctly in the curve of the arms, allowing work to be performed with minimal pressure even on small bales. We look forward to your inquiry!

The Unigrip M+ bale grapple was developed to deliver outstanding performance in dense stacking and efficient bale retrieval. It is designed for bales with a diameter of 120 to 160 cm. Its clever construction incorporates numerous unique design features that contribute to the exceptional performance of Quicke’s Unigrips. Key features include: • Pivot points: The arms’ pivot points are closely spaced on the main frame, so that when the arms open, their ends point almost straight forward. • Single-cylinder design: This design allows the arms to move sideways like a parallelogram, enabling one arm to follow the adjacent bale as it moves in and out of the stack. • Smooth edges: Special care is taken to ensure that no sharp edges or weld seams come into contact with the bale being transported or the adjacent bale in the stack. • Wide opening: Combined with the other features, this contributes to outstanding performance when stacking and retrieving tightly stacked bales. The rear frame, to which the hooks are attached, is slightly angled so that most loaders can pick up the bales in the field. In addition, the compact frame design keeps the bale close to the loader, which is particularly important for smaller tractors and loaders in hilly terrain. Additional features include: • Arm design: The arms work in conjunction with the main frame to gently push the bale backward, ensuring optimal grip while minimizing compression and preventing damage to the silage wrap. • Optional valves: The DBV and the load-holding valve reduce pressure on the bale while ensuring a secure grip during operation. The load-holding valve is designed for loaders with free return on the third function. Note: The DBV (11256837Q) is required for the load-holding function. • Adjustable rear bale support: This can be adjusted to optimally grip bales of various diameters. As a result, the bale always rests correctly in the curve of the arms, allowing work to be performed with minimal pressure even on small bales. We look forward to your inquiry!