Lindner Unitrac 112 L

Lindner Unitrac 112 L Drive, consisting of the base vehicle and a tipper body. The vehicle was manufactured in 2019 and has 34 Tkm or 3,305 operating hours.
Service + TÜV upon sale—New!!!

Technical specifications as follows:
Engine and Drivetrain
- Engine: 4-cylinder VM turbodiesel, 2,970 cm³ – 79 kW (107 PS) at 420 Nm of torque
- Emissions standard: Euro 6
- Transmission: Lindner-ZF continuously variable transmission
- Speed: Up to 40 or 50 km/h
- PTO: Electrohydraulically controlled / Rear/Center: 540 / 1,000 U/min
- Optional front PTO at 1,000 rpm
Hydraulics
System: Multi-circuit hydraulic system with variable-displacement pump and load-sensing system
Flow rate: Max. 88 l/min (at 200 bar), 45 l available (35 l available flow)
Control: Convenient via joystick, working hydraulics circuits


Dimensions and Chassis
Width: 2,115 mm
Height: 2,484 mm
Wheelbase: 2,750 mm

Chassis: High-performance chassis with independent suspension and hydraulic suspension
Steering: All-wheel steering (optional, reduces turning radius to 3.5 m)
Payload: Over 5000 kg
Miscellaneous

- Brakes: Standard dual-circuit system with ventilated front disc brakes
- Lighting: LED daytime running lights, LED taillights, optional full-LED headlights

Lindner Unitrac 112 L Drive, consisting of the base vehicle and a tipper body. The vehicle was manufactured in 2019 and has 34 Tkm or 3,305 operating hours. Service + TÜV upon sale—New!!! Technical specifications as follows: Engine and Drivetrain - Engine: 4-cylinder VM turbodiesel, 2,970 cm³ – 79 kW (107 PS) at 420 Nm of torque - Emissions standard: Euro 6 - Transmission: Lindner-ZF continuously variable transmission - Speed: Up to 40 or 50 km/h - PTO: Electrohydraulically controlled / Rear/Center: 540 / 1,000 U/min - Optional front PTO at 1,000 rpm Hydraulics System: Multi-circuit hydraulic system with variable-displacement pump and load-sensing system Flow rate: Max. 88 l/min (at 200 bar), 45 l available (35 l available flow) Control: Convenient via joystick, working hydraulics circuits Dimensions and Chassis Width: 2,115 mm Height: 2,484 mm Wheelbase: 2,750 mm Chassis: High-performance chassis with independent suspension and hydraulic suspension Steering: All-wheel steering (optional, reduces turning radius to 3.5 m) Payload: Over 5000 kg Miscellaneous - Brakes: Standard dual-circuit system with ventilated front disc brakes - Lighting: LED daytime running lights, LED taillights, optional full-LED headlights and work lights - Display system: TracLink system with display and controls via the IBC monitor - Cab: Can be tilted 50° for maintenance - Tires: 8 sets (summer and winter) – winter tires 1 year old - Optional: Snow chains We also have the following options in stock: - Mulcher with branch cutter - Bucher V-plow, model: Arox VPG - Bucher / Gmeiner Husky salt spreader All vehicles on our website: kommunalfahrzeuge-braun.de Subject to errors, typos, equipment specifications, and prior sale. The vehicle description is intended solely for the general identification of the vehicle and does not constitute a warranty under sales law. Despite our best efforts and due diligence, errors in this specific vehicle description cannot be ruled out. The vehicle description is intended solely for the general identification of the vehicle and does not constitute a part of the contract in a legal sense. The agreements in the purchase contract are the sole and decisive factor. Please refer to your purchase contract or sales invoice for the exact scope of equipment. Our assessment of the vehicles is subjective and non-binding.

Lindner Unitrac 112 L Drive, consisting of the base vehicle and a tipper body. The vehicle was manufactured in 2019 and has 34 Tkm or 3,305 operating hours. Service + TÜV upon sale—New!!! Technical specifications as follows: Engine and Drivetrain - Engine: 4-cylinder VM turbodiesel, 2,970 cm³ – 79 kW (107 PS) at 420 Nm of torque - Emissions standard: Euro 6 - Transmission: Lindner-ZF continuously variable transmission - Speed: Up to 40 or 50 km/h - PTO: Electrohydraulically controlled / Rear/Center: 540 / 1,000 U/min - Optional front PTO at 1,000 rpm Hydraulics System: Multi-circuit hydraulic system with variable-displacement pump and load-sensing system Flow rate: Max. 88 l/min (at 200 bar), 45 l available (35 l available flow) Control: Convenient via joystick, working hydraulics circuits Dimensions and Chassis Width: 2,115 mm Height: 2,484 mm Wheelbase: 2,750 mm Chassis: High-performance chassis with independent suspension and hydraulic suspension Steering: All-wheel steering (optional, reduces turning radius to 3.5 m) Payload: Over 5000 kg Miscellaneous - Brakes: Standard dual-circuit system with ventilated front disc brakes - Lighting: LED daytime running lights, LED taillights, optional full-LED headlights and work lights - Display system: TracLink system with display and controls via the IBC monitor - Cab: Can be tilted 50° for maintenance - Tires: 8 sets (summer and winter) – winter tires 1 year old - Optional: Snow chains We also have the following options in stock: - Mulcher with branch cutter - Bucher V-plow, model: Arox VPG - Bucher / Gmeiner Husky salt spreader All vehicles on our website: kommunalfahrzeuge-braun.de Subject to errors, typos, equipment specifications, and prior sale. The vehicle description is intended solely for the general identification of the vehicle and does not constitute a warranty under sales law. Despite our best efforts and due diligence, errors in this specific vehicle description cannot be ruled out. The vehicle description is intended solely for the general identification of the vehicle and does not constitute a part of the contract in a legal sense. The agreements in the purchase contract are the sole and decisive factor. Please refer to your purchase contract or sales invoice for the exact scope of equipment. Our assessment of the vehicles is subjective and non-binding.