Jansen Schlegelmulcher EFGCH-240 mit hydraulisch Seite

The Jansen EFGCH-240 flail mower with hydraulic side shift is characterized by its exceptionally robust construction. It features a specially reinforced bevel gear and is ideal for use as a mulching mower, tractor mower, etc.

The tractor mower has a cutting width of approx. 230 cm and is driven by the PTO shaft included in the scope of delivery.

Using the hydraulic side shift, the mower can be moved to the left and right. For this function, you need a hydraulic control circuit on your tractor, as the mower is equipped with a double-acting hydraulic cylinder for this purpose.
This mulcher is equipped with the heaviest gearbox in its class. Unlike mowers equipped with lightweight Y-blades, this mower delivers superior performance thanks to its high flywheel mass, which results from the heavy hammer blades and the heavier shaft. The 32 specially hardened, 0.8 kg hammer blades reduce the cut material to a minimum. Even very tall grass, bushy, or straw-like clippings are no problem with this mower!
The double-spiral rotor, with its even rotor load, ensures particularly smooth operation and long service life with significantly less effort. Even very tall grass, bushy, or straw-like clippings are no problem with this mower!
Additionally, the mulcher is equipped with a heavy-duty rear roller and

The Jansen EFGCH-240 flail mower with hydraulic side shift is characterized by its exceptionally robust construction. It features a specially reinforced bevel gear and is ideal for use as a mulching mower, tractor mower, etc. The tractor mower has a cutting width of approx. 230 cm and is driven by the PTO shaft included in the scope of delivery. Using the hydraulic side shift, the mower can be moved to the left and right. For this function, you need a hydraulic control circuit on your tractor, as the mower is equipped with a double-acting hydraulic cylinder for this purpose. This mulcher is equipped with the heaviest gearbox in its class. Unlike mowers equipped with lightweight Y-blades, this mower delivers superior performance thanks to its high flywheel mass, which results from the heavy hammer blades and the heavier shaft. The 32 specially hardened, 0.8 kg hammer blades reduce the cut material to a minimum. Even very tall grass, bushy, or straw-like clippings are no problem with this mower! The double-spiral rotor, with its even rotor load, ensures particularly smooth operation and long service life with significantly less effort. Even very tall grass, bushy, or straw-like clippings are no problem with this mower! Additionally, the mulcher is equipped with a heavy-duty rear roller and a free-wheel drive. The cutting height can be adjusted via the skids mounted on the sides. Pendulum-suspended, galvanized slats on the front of the mower prevent stones and other debris from escaping. The mower is mounted to your tractor’s three-point hitch (Cat. I and above). Your tractor should have a minimum power output of 60 hp. Compare our products with those of our competitors! You won’t find anything comparable anytime soon. Technical Specifications: Mowing width: approx. 2300 mm Hydraulic side shift Weight: 555 kg Weight with packaging: approx. 585 kg PTO shaft: included Timing belts: 4 pieces Dimensions: 2560x950x930 mm (LxWxH) Packaging: Wooden crate Flail shaft Ø: 120 mm Rear roller Ø: 95 mm Packaged dimensions: 2660x880x800 mm (LxWxH) RPM: 540 Wall thickness: 6 mm (inner sheets 5 mm) Mounting: Three-point hitch, Cat. I or higher Tractor: min. 60 hp Note: The unit is delivered well-packed and disassembled in a wooden crate. You should allow approximately 4–5 hours for final assembly. The scope of delivery includes a German operating manual and an exploded view diagram. Assembly is generally straightforward, but we recommend that two people perform the installation. If you need assistance, we are happy to help by phone. A top link pin is not included in the scope of delivery! The gearbox is dry and must be filled with oil (80W90, approx. 1 liter) before commissioning.

The Jansen EFGCH-240 flail mower with hydraulic side shift is characterized by its exceptionally robust construction. It features a specially reinforced bevel gear and is ideal for use as a mulching mower, tractor mower, etc. The tractor mower has a cutting width of approx. 230 cm and is driven by the PTO shaft included in the scope of delivery. Using the hydraulic side shift, the mower can be moved to the left and right. For this function, you need a hydraulic control circuit on your tractor, as the mower is equipped with a double-acting hydraulic cylinder for this purpose. This mulcher is equipped with the heaviest gearbox in its class. Unlike mowers equipped with lightweight Y-blades, this mower delivers superior performance thanks to its high flywheel mass, which results from the heavy hammer blades and the heavier shaft. The 32 specially hardened, 0.8 kg hammer blades reduce the cut material to a minimum. Even very tall grass, bushy, or straw-like clippings are no problem with this mower! The double-spiral rotor, with its even rotor load, ensures particularly smooth operation and long service life with significantly less effort. Even very tall grass, bushy, or straw-like clippings are no problem with this mower! Additionally, the mulcher is equipped with a heavy-duty rear roller and a free-wheel drive. The cutting height can be adjusted via the skids mounted on the sides. Pendulum-suspended, galvanized slats on the front of the mower prevent stones and other debris from escaping. The mower is mounted to your tractor’s three-point hitch (Cat. I and above). Your tractor should have a minimum power output of 60 hp. Compare our products with those of our competitors! You won’t find anything comparable anytime soon. Technical Specifications: Mowing width: approx. 2300 mm Hydraulic side shift Weight: 555 kg Weight with packaging: approx. 585 kg PTO shaft: included Timing belts: 4 pieces Dimensions: 2560x950x930 mm (LxWxH) Packaging: Wooden crate Flail shaft Ø: 120 mm Rear roller Ø: 95 mm Packaged dimensions: 2660x880x800 mm (LxWxH) RPM: 540 Wall thickness: 6 mm (inner sheets 5 mm) Mounting: Three-point hitch, Cat. I or higher Tractor: min. 60 hp Note: The unit is delivered well-packed and disassembled in a wooden crate. You should allow approximately 4–5 hours for final assembly. The scope of delivery includes a German operating manual and an exploded view diagram. Assembly is generally straightforward, but we recommend that two people perform the installation. If you need assistance, we are happy to help by phone. A top link pin is not included in the scope of delivery! The gearbox is dry and must be filled with oil (80W90, approx. 1 liter) before commissioning.