Iseki TM 3267 AL Eco

Engine:
The ISEKI TM 3267 AL is powered by an ISEKI-developed engine with an output of 26 hp and a displacement of 1,123 cc.
This engine is water-cooled and meets the emission limits of the EU Stage V directive.
Transmission:
The ISEKI TM 3267 AL offers three reduction gear ranges. Combined
with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires).
It is operated via an accelerator pedal in the right footwell,
a range and gear shift lever on the left
fender, and a mechanical reverse lever on the left side of the steering column.
Hydraulics:
The ISEKI TM 3267 AL ECO ironer is equipped

Engine: The ISEKI TM 3267 AL is powered by an ISEKI-developed engine with an output of 26 hp and a displacement of 1,123 cc. This engine is water-cooled and meets the emission limits of the EU Stage V directive. Transmission: The ISEKI TM 3267 AL offers three reduction gear ranges. Combined with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires). It is operated via an accelerator pedal in the right footwell, a range and gear shift lever on the left fender, and a mechanical reverse lever on the left side of the steering column. Hydraulics: The ISEKI TM 3267 AL ECO ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled via a single lever mounted on the right fender. The machine is also equipped with a hydraulic rear power lift, which is also controlled via a lever on the right fender. The model offers 540 rpm on the rear PTO. The PTOs are mechanically preselected and mechanically engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged. Equipment: The machine is equipped as standard for operation in areas subject to German road traffic regulations (StVZO). A 7-pin trailer socket is included as standard. Additional equipment: - Front wheels 6.00-12 - Rear wheels 9.50-16

Engine: The ISEKI TM 3267 AL is powered by an ISEKI-developed engine with an output of 26 hp and a displacement of 1,123 cc. This engine is water-cooled and meets the emission limits of the EU Stage V directive. Transmission: The ISEKI TM 3267 AL offers three reduction gear ranges. Combined with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires). It is operated via an accelerator pedal in the right footwell, a range and gear shift lever on the left fender, and a mechanical reverse lever on the left side of the steering column. Hydraulics: The ISEKI TM 3267 AL ECO ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled via a single lever mounted on the right fender. The machine is also equipped with a hydraulic rear power lift, which is also controlled via a lever on the right fender. The model offers 540 rpm on the rear PTO. The PTOs are mechanically preselected and mechanically engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged. Equipment: The machine is equipped as standard for operation in areas subject to German road traffic regulations (StVZO). A 7-pin trailer socket is included as standard. Additional equipment: - Front wheels 6.00-12 - Rear wheels 9.50-16

Mr.
Stefan Huetter

+43 664 *******

Your message to the seller

Send inquiry