TANK FUEL

Storage tank - mobile distributor for diesel fuel with horizontal or vertical axis, cylindrical, manufactured by Emiliana Serbatoi.HORIZONTAL AXIS: The tanks are horizontal axis, cylindrical, constructed with rounded bottoms and calendered sheet metal in S 235 JR UNI EN **** carbon steel, assembled using a gas-shielded arc welding process and subsequently treated with a layer of rustproofing and a layer of green enamel finish; They are tested for leaks using a pneumatic test. The Fuel Tanks are equipped with a containment basin with a volume equal to 110% of the geometric capacity of the tank. They are complete with 4 anchoring clamps, grounding connection, sleeve with drain cap, four housings suitable for mounting and fixing the uprights of the protective canopy; all in accordance with Ministerial Decree 22/11/2017.The Fuel Tanks are also equipped with a dispensing system that can be contained within a special metal cabinet or consist of a fuel dispenser.Available capacities: 490, 1,000, 1,300, 2,400, 3,000, 5,000, 6,000, 7,000, and 9,000 liters. General characteristics: Manhole Ø 400 mm with bolted cover and gasket.Quick-release 3" lockable loading ring nut. Load limiting valve calibrated to 90% of the tank's geometric capacity. Vent with flame arrestor screen 240 cm above the floor (photo 21). Externally visible level indicator.Anti-roll support feet. Bottom drain for periodic cleaning equipped with safety cap. External, raised suction pipe to allow for proper diesel fuel settling; the suction pipe is equipped with a

Storage tank - mobile distributor for diesel fuel with horizontal or vertical axis, cylindrical, manufactured by Emiliana Serbatoi.HORIZONTAL AXIS: The tanks are horizontal axis, cylindrical, constructed with rounded bottoms and calendered sheet metal in S 235 JR UNI EN **** carbon steel, assembled using a gas-shielded arc welding process and subsequently treated with a layer of rustproofing and a layer of green enamel finish; They are tested for leaks using a pneumatic test. The Fuel Tanks are equipped with a containment basin with a volume equal to 110% of the geometric capacity of the tank. They are complete with 4 anchoring clamps, grounding connection, sleeve with drain cap, four housings suitable for mounting and fixing the uprights of the protective canopy; all in accordance with Ministerial Decree 22/11/2017.The Fuel Tanks are also equipped with a dispensing system that can be contained within a special metal cabinet or consist of a fuel dispenser.Available capacities: 490, 1,000, 1,300, 2,400, 3,000, 5,000, 6,000, 7,000, and 9,000 liters. General characteristics: Manhole Ø 400 mm with bolted cover and gasket.Quick-release 3" lockable loading ring nut. Load limiting valve calibrated to 90% of the tank's geometric capacity. Vent with flame arrestor screen 240 cm above the floor (photo 21). Externally visible level indicator.Anti-roll support feet. Bottom drain for periodic cleaning equipped with safety cap. External, raised suction pipe to allow for proper diesel fuel settling; the suction pipe is equipped with a non-return valve and ball valve. Connection point for grounding and equipotential bonding.Starting from the 5,000-liter version, steps and non-slip support surface are provided. Canopy: Weather protection canopy, made with a sturdy galvanized carbon steel frame and self-supporting galvanized corrugated sheet metal cover. They are designed to be mounted and secured with bolts to the housings in the Tank Fuel containment basins. (Optional) DOUBLE-WALLED VERTICAL AXIS: The double-walled tanks are vertical axis, cylindrical, constructed with curved bases and calendered S 235 JR UNI EN **** carbon steel sheets. They are also equipped with dispensing cabinets or dispensers. Capacity from 1300 to 9000 liters nominal. Intermediate sizes: 2400, 3000, 5000, 7000 liters. The vertical double-walled tank is equipped with: 400 mm diameter manhole with bolted cover and gasket.Upper spill tray with lockable cover. 3" lockable quick-connect loading ring nut. 90% load limiting valve. Vent with flame arrestor screen, all located outside the well. Mechanical level indicator. Support feet. Inspection cap for monitoring the cavity.External suction pipe. Containment tank located under the dispensing cabinet to contain any leaks from the suction pipe. Grounding connection. Pump block sensor at minimum level. Immediate availability: 2 - TANK FUEL TF2/50 with a geometric capacity of 2,400 liters, year 20181 - TANK FUEL TF1/50 geometric capacity 1,270 liters, year 2018*Tanks complete with 110% containment basin, 50 liters/min pump, 220 volts power supply, automatic nozzle, liter counter, 6.00 m carbopress hose + water separator filter.*

Storage tank - mobile distributor for diesel fuel with horizontal or vertical axis, cylindrical, manufactured by Emiliana Serbatoi.HORIZONTAL AXIS: The tanks are horizontal axis, cylindrical, constructed with rounded bottoms and calendered sheet metal in S 235 JR UNI EN **** carbon steel, assembled using a gas-shielded arc welding process and subsequently treated with a layer of rustproofing and a layer of green enamel finish; They are tested for leaks using a pneumatic test. The Fuel Tanks are equipped with a containment basin with a volume equal to 110% of the geometric capacity of the tank. They are complete with 4 anchoring clamps, grounding connection, sleeve with drain cap, four housings suitable for mounting and fixing the uprights of the protective canopy; all in accordance with Ministerial Decree 22/11/2017.The Fuel Tanks are also equipped with a dispensing system that can be contained within a special metal cabinet or consist of a fuel dispenser.Available capacities: 490, 1,000, 1,300, 2,400, 3,000, 5,000, 6,000, 7,000, and 9,000 liters. General characteristics: Manhole Ø 400 mm with bolted cover and gasket.Quick-release 3" lockable loading ring nut. Load limiting valve calibrated to 90% of the tank's geometric capacity. Vent with flame arrestor screen 240 cm above the floor (photo 21). Externally visible level indicator.Anti-roll support feet. Bottom drain for periodic cleaning equipped with safety cap. External, raised suction pipe to allow for proper diesel fuel settling; the suction pipe is equipped with a non-return valve and ball valve. Connection point for grounding and equipotential bonding.Starting from the 5,000-liter version, steps and non-slip support surface are provided. Canopy: Weather protection canopy, made with a sturdy galvanized carbon steel frame and self-supporting galvanized corrugated sheet metal cover. They are designed to be mounted and secured with bolts to the housings in the Tank Fuel containment basins. (Optional) DOUBLE-WALLED VERTICAL AXIS: The double-walled tanks are vertical axis, cylindrical, constructed with curved bases and calendered S 235 JR UNI EN **** carbon steel sheets. They are also equipped with dispensing cabinets or dispensers. Capacity from 1300 to 9000 liters nominal. Intermediate sizes: 2400, 3000, 5000, 7000 liters. The vertical double-walled tank is equipped with: 400 mm diameter manhole with bolted cover and gasket.Upper spill tray with lockable cover. 3" lockable quick-connect loading ring nut. 90% load limiting valve. Vent with flame arrestor screen, all located outside the well. Mechanical level indicator. Support feet. Inspection cap for monitoring the cavity.External suction pipe. Containment tank located under the dispensing cabinet to contain any leaks from the suction pipe. Grounding connection. Pump block sensor at minimum level. Immediate availability: 2 - TANK FUEL TF2/50 with a geometric capacity of 2,400 liters, year 20181 - TANK FUEL TF1/50 geometric capacity 1,270 liters, year 2018*Tanks complete with 110% containment basin, 50 liters/min pump, 220 volts power supply, automatic nozzle, liter counter, 6.00 m carbopress hose + water separator filter.*