Fliegl AgroCenter Astsäge hydr. DUO

No. 70571
Branch Saw “WoodKing Duo®” – 3 Blades
The all-around workhorse—left- and right-hand mounting with a single tool. Mounting is possible on either side, allowing the branch saw to be used in both left- and right-hand configurations. The screw-on mounting plate can be attached for either left- or right-side mounting as needed. Afterward, the saw head must be rotated 180°.
Technical Details:
- Working speed: up to approx. 8 km/h
- Branches up to approx. Ø 280 mm
- Cutting width: 2100 mm
- Power distribution via V-belts ensures smooth operation of the saw blades
- Hydraulic drive with 3 special carbide-tipped saw blades (Ø 700 mm)
- Saw blades with 60 Widi-tipped teeth
Special features:
- Clean cut on both thin and thick branches
- Standard feature: Protective bar prevents damage during work close to the ground
- Boom extends 1,200 mm to the side, allowing you to drive along the roadside and cut within the boom’s reach
- Mounting on both sides for left- or right-hand installation (mounted on the right)
- EURO mounting bracket (screw-on)
- Standard: equipped with a side counterweight, which prevents one-sided loading of the carrier vehicle’s swing arm and reduces the risk of tipping
- Standard: Control unit with integrated pressure sensor emits an audible signal in the cab if oil pressure is too high, preventing the saw blades from jamming. This control unit allows simultaneous operation of all functions while working.
- Standard: 111° tilt mechanism—cutting angle of the branch saw is infinitely

No. 70571 Branch Saw “WoodKing Duo®” – 3 Blades The all-around workhorse—left- and right-hand mounting with a single tool. Mounting is possible on either side, allowing the branch saw to be used in both left- and right-hand configurations. The screw-on mounting plate can be attached for either left- or right-side mounting as needed. Afterward, the saw head must be rotated 180°. Technical Details: - Working speed: up to approx. 8 km/h - Branches up to approx. Ø 280 mm - Cutting width: 2100 mm - Power distribution via V-belts ensures smooth operation of the saw blades - Hydraulic drive with 3 special carbide-tipped saw blades (Ø 700 mm) - Saw blades with 60 Widi-tipped teeth Special features: - Clean cut on both thin and thick branches - Standard feature: Protective bar prevents damage during work close to the ground - Boom extends 1,200 mm to the side, allowing you to drive along the roadside and cut within the boom’s reach - Mounting on both sides for left- or right-hand installation (mounted on the right) - EURO mounting bracket (screw-on) - Standard: equipped with a side counterweight, which prevents one-sided loading of the carrier vehicle’s swing arm and reduces the risk of tipping - Standard: Control unit with integrated pressure sensor emits an audible signal in the cab if oil pressure is too high, preventing the saw blades from jamming. This control unit allows simultaneous operation of all functions while working. - Standard: 111° tilt mechanism—cutting angle of the branch saw is infinitely adjustable The sales team at Schwarzmayr would be happy to demonstrate the equipment/machine to you and asks that you schedule an appointment to view it at our facility. We’re also here for you on Saturdays until 12:00 p.m.! We’d also be happy to send you a quote via email. We look forward to your visit or inquiry.

No. 70571 Branch Saw “WoodKing Duo®” – 3 Blades The all-around workhorse—left- and right-hand mounting with a single tool. Mounting is possible on either side, allowing the branch saw to be used in both left- and right-hand configurations. The screw-on mounting plate can be attached for either left- or right-side mounting as needed. Afterward, the saw head must be rotated 180°. Technical Details: - Working speed: up to approx. 8 km/h - Branches up to approx. Ø 280 mm - Cutting width: 2100 mm - Power distribution via V-belts ensures smooth operation of the saw blades - Hydraulic drive with 3 special carbide-tipped saw blades (Ø 700 mm) - Saw blades with 60 Widi-tipped teeth Special features: - Clean cut on both thin and thick branches - Standard feature: Protective bar prevents damage during work close to the ground - Boom extends 1,200 mm to the side, allowing you to drive along the roadside and cut within the boom’s reach - Mounting on both sides for left- or right-hand installation (mounted on the right) - EURO mounting bracket (screw-on) - Standard: equipped with a side counterweight, which prevents one-sided loading of the carrier vehicle’s swing arm and reduces the risk of tipping - Standard: Control unit with integrated pressure sensor emits an audible signal in the cab if oil pressure is too high, preventing the saw blades from jamming. This control unit allows simultaneous operation of all functions while working. - Standard: 111° tilt mechanism—cutting angle of the branch saw is infinitely adjustable The sales team at Schwarzmayr would be happy to demonstrate the equipment/machine to you and asks that you schedule an appointment to view it at our facility. We’re also here for you on Saturdays until 12:00 p.m.! We’d also be happy to send you a quote via email. We look forward to your visit or inquiry.