Elmag Schweissinverter M3S 3040 T 4XL inklusive

The welding inverter can also be delivered directly to your home.
- SG2 (G3 Si 1) welding wire, 15 kg, 1.0 mm
TECHNICAL SPECIFICATIONS:
- Portable multifunction welding inverter
- 3 welding processes in one unit: MIG/MAG, MMA/manual arc, and LIFT-TIG (DC)
- Synergic mode for MIG/MAG welding of steel, stainless steel, aluminum, and CuSi materials, or manual mode
- 300 amps max. welding current
- 40% duty cycle @ 300A, continuously adjustable from 30–300A
- Three-phase 3~400 V, compliant with the Eco-Design Directive due to energy efficiency > 80%
- 4-roller drive including ring gear connection to pressure rollers made of die-cast aluminum
- XL housing size for welding wire spool diameter and weight: max. Ø 300 mm / max. 15 kg
- Includes 2-stroke, 4-stroke, special 4-stroke, and spot welding functions
- In MIG/MAG mode: inductance, pre-gas flow (PrG) and post-gas flow (PoG) under FN, soft start (SFt),
- BurnBack (bub), Up/Down remote control (u-d); in special 4-stroke mode, also adjustable start current
- (SCP) and end-crater current (ECP); and in MMA mode: Hot Start (Hot) & Arc Force (Arcf) adjustable
- JOB function: 10 weld programs can be stored
- Original ELMAG hose set MBC 36/4m
TECHNICAL SPECIFICATIONS:
- Material thickness 0.6–12 mm
- Steel wire diameter 0.6–1.2 mm
- Stainless steel wire diameter: 0.8–1.2 mm
- Aluminum wire diameter: 1.0–1.2 mm
- Flux-cored wire diameter: 0.8–1.2 mm
- Welding wire spool diameter: 200 & 300 mm
- Welding wire spool weight: 5 & 15 kg
- Welding electrode diameter: 1.6–8 mm
- Welding current range: MIG/MAG 30–300 | MMA & TIG 10–300 A
- 100% duty cycle (10 min at 40 °C) at

The welding inverter can also be delivered directly to your home. - SG2 (G3 Si 1) welding wire, 15 kg, 1.0 mm TECHNICAL SPECIFICATIONS: - Portable multifunction welding inverter - 3 welding processes in one unit: MIG/MAG, MMA/manual arc, and LIFT-TIG (DC) - Synergic mode for MIG/MAG welding of steel, stainless steel, aluminum, and CuSi materials, or manual mode - 300 amps max. welding current - 40% duty cycle @ 300A, continuously adjustable from 30–300A - Three-phase 3~400 V, compliant with the Eco-Design Directive due to energy efficiency > 80% - 4-roller drive including ring gear connection to pressure rollers made of die-cast aluminum - XL housing size for welding wire spool diameter and weight: max. Ø 300 mm / max. 15 kg - Includes 2-stroke, 4-stroke, special 4-stroke, and spot welding functions - In MIG/MAG mode: inductance, pre-gas flow (PrG) and post-gas flow (PoG) under FN, soft start (SFt), - BurnBack (bub), Up/Down remote control (u-d); in special 4-stroke mode, also adjustable start current - (SCP) and end-crater current (ECP); and in MMA mode: Hot Start (Hot) & Arc Force (Arcf) adjustable - JOB function: 10 weld programs can be stored - Original ELMAG hose set MBC 36/4m TECHNICAL SPECIFICATIONS: - Material thickness 0.6–12 mm - Steel wire diameter 0.6–1.2 mm - Stainless steel wire diameter: 0.8–1.2 mm - Aluminum wire diameter: 1.0–1.2 mm - Flux-cored wire diameter: 0.8–1.2 mm - Welding wire spool diameter: 200 & 300 mm - Welding wire spool weight: 5 & 15 kg - Welding electrode diameter: 1.6–8 mm - Welding current range: MIG/MAG 30–300 | MMA & TIG 10–300 A - 100% duty cycle (10 min at 40 °C) at a welding current of 199 A - Duty cycle (10 min at 40°C) at max. welding current 40 / 300 / % / A - Open-circuit voltage 68 V - Power connection / Phases 400 / 3 / V / ~ - Mains current tolerance +10 / -10% - Mains fuse (slow-blow) 16 AT - Protection class (IP) 215 - Efficiency 80% - No-load power consumption 25 W - Maximum l1 current / effective l1 current 19.1 / 12.1 A - Ground connection plug / cross-section 13 / 50 Ø / mm² - CEE 16A connector - Depth 960 mm - Height: 740 mm - Weight: 45 kg - Feed drive: 4 rollers So that I can set aside enough time for you, please contact me by phone or email to schedule an appointment. TeamMauch

The welding inverter can also be delivered directly to your home. - SG2 (G3 Si 1) welding wire, 15 kg, 1.0 mm TECHNICAL SPECIFICATIONS: - Portable multifunction welding inverter - 3 welding processes in one unit: MIG/MAG, MMA/manual arc, and LIFT-TIG (DC) - Synergic mode for MIG/MAG welding of steel, stainless steel, aluminum, and CuSi materials, or manual mode - 300 amps max. welding current - 40% duty cycle @ 300A, continuously adjustable from 30–300A - Three-phase 3~400 V, compliant with the Eco-Design Directive due to energy efficiency > 80% - 4-roller drive including ring gear connection to pressure rollers made of die-cast aluminum - XL housing size for welding wire spool diameter and weight: max. Ø 300 mm / max. 15 kg - Includes 2-stroke, 4-stroke, special 4-stroke, and spot welding functions - In MIG/MAG mode: inductance, pre-gas flow (PrG) and post-gas flow (PoG) under FN, soft start (SFt), - BurnBack (bub), Up/Down remote control (u-d); in special 4-stroke mode, also adjustable start current - (SCP) and end-crater current (ECP); and in MMA mode: Hot Start (Hot) & Arc Force (Arcf) adjustable - JOB function: 10 weld programs can be stored - Original ELMAG hose set MBC 36/4m TECHNICAL SPECIFICATIONS: - Material thickness 0.6–12 mm - Steel wire diameter 0.6–1.2 mm - Stainless steel wire diameter: 0.8–1.2 mm - Aluminum wire diameter: 1.0–1.2 mm - Flux-cored wire diameter: 0.8–1.2 mm - Welding wire spool diameter: 200 & 300 mm - Welding wire spool weight: 5 & 15 kg - Welding electrode diameter: 1.6–8 mm - Welding current range: MIG/MAG 30–300 | MMA & TIG 10–300 A - 100% duty cycle (10 min at 40 °C) at a welding current of 199 A - Duty cycle (10 min at 40°C) at max. welding current 40 / 300 / % / A - Open-circuit voltage 68 V - Power connection / Phases 400 / 3 / V / ~ - Mains current tolerance +10 / -10% - Mains fuse (slow-blow) 16 AT - Protection class (IP) 215 - Efficiency 80% - No-load power consumption 25 W - Maximum l1 current / effective l1 current 19.1 / 12.1 A - Ground connection plug / cross-section 13 / 50 Ø / mm² - CEE 16A connector - Depth 960 mm - Height: 740 mm - Weight: 45 kg - Feed drive: 4 rollers So that I can set aside enough time for you, please contact me by phone or email to schedule an appointment. TeamMauch