Astsäge Jansen AS-600-Hoflader-Frontlader

With the Jansen AS-600 pruning saw, you can easily cut through branches up to 200 mm thick in seconds. Especially in the agricultural sector, the AS-600 pruning saw is characterized by smooth running and a very clean cut, making it ideal for pruning trees. Hedges and bushes can also be processed with this saw.

3 specially hardened saw blades (each with 80 teeth) with a diameter of 600 mm and a weight of approx. 14 kg are installed. The saw has an effective working width of approx. 1750

With the Jansen AS-600 pruning saw, you can easily cut through branches up to 200 mm thick in seconds. Especially in the agricultural sector, the AS-600 pruning saw is characterized by smooth running and a very clean cut, making it ideal for pruning trees. Hedges and bushes can also be processed with this saw. 3 specially hardened saw blades (each with 80 teeth) with a diameter of 600 mm and a weight of approx. 14 kg are installed. The saw has an effective working width of approx. 1750 mm. Mounted on the wheel loader, telehandler or tractor front loader, the pruning saw is driven hydraulically and via V-belts. The boom can be pushed out approx. 1000 mm to the side. The range from the center of the front loader mount to the saw blades is approx. 1.55 m. The side-mounted counterweight (approx. 265 kg) only minimally loads the swingarm of the carrier vehicle, even when the saw is fully extended. Thanks to the hydraulic tilting device, you can also reach places that are difficult to access. I

With the Jansen AS-600 pruning saw, you can easily cut through branches up to 200 mm thick in seconds. Especially in the agricultural sector, the AS-600 pruning saw is characterized by smooth running and a very clean cut, making it ideal for pruning trees. Hedges and bushes can also be processed with this saw. 3 specially hardened saw blades (each with 80 teeth) with a diameter of 600 mm and a weight of approx. 14 kg are installed. The saw has an effective working width of approx. 1750 mm. Mounted on the wheel loader, telehandler or tractor front loader, the pruning saw is driven hydraulically and via V-belts. The boom can be pushed out approx. 1000 mm to the side. The range from the center of the front loader mount to the saw blades is approx. 1.55 m. The side-mounted counterweight (approx. 265 kg) only minimally loads the swingarm of the carrier vehicle, even when the saw is fully extended. Thanks to the hydraulic tilting device, you can also reach places that are difficult to access. I