Müthing MU-VS 280 Shark

No. 71402
Technical Specifications:
Working width 280 cm
Overall width 300 cm
Max. tractor horsepower at 1,000 rpm: 200 PS
Weight: 1,112 kg
M-Hammer: 24 pieces
Standard equipment:
- Made of fine-grain QSt/E steel for front and rear mounting with a Category 2 three-point hitch
- Hydraulic side shift: 56 cm stroke
- Transmission with freewheel and direct drive for 1,000 rpm
- Automatic V-belt tensioning
- Highly tempered M-Hammer flails, forged from special steel
- Smooth-running rotor with specially shaped, spirally arranged tool holders
- Screw-on short-chopping bar system: “Shark Fin” Müthing patent
- Large, patented swivel support roller for optional material discharge behind or in front of the roller and for adjusting the working height of the mulcher
- Robust Starinth® support roller bearing
- Side wear skids
- Hardox wear skids, bolt-on
- High-tempered spring steel swing protection flaps
- Parking stand
- Slotted holes in the lower link mounts for better ground adaptation with a uniform cutting surface
- Power take-off shaft with hardened inner tube and bushing-bottom lubrication—heavy-duty design
- Adjustable Vario cutting bar for setting the degree of shredding
- Wear insert in the housing (pre-installed)
- High-torque gearbox with freewheel and direct drive for 1,000 rpm
The Schwarzmayr sales team would be happy to demonstrate the machine for you and asks that you schedule an appointment to view it at our facility.
We’re also here for you on Saturdays until 12:00 p.m.!
We’d also be happy to send you a quote via email.
We look forward to your visit or inquiry.

No. 71402 Technical Specifications: Working width 280 cm Overall width 300 cm Max. tractor horsepower at 1,000 rpm: 200 PS Weight: 1,112 kg M-Hammer: 24 pieces Standard equipment: - Made of fine-grain QSt/E steel for front and rear mounting with a Category 2 three-point hitch - Hydraulic side shift: 56 cm stroke - Transmission with freewheel and direct drive for 1,000 rpm - Automatic V-belt tensioning - Highly tempered M-Hammer flails, forged from special steel - Smooth-running rotor with specially shaped, spirally arranged tool holders - Screw-on short-chopping bar system: “Shark Fin” Müthing patent - Large, patented swivel support roller for optional material discharge behind or in front of the roller and for adjusting the working height of the mulcher - Robust Starinth® support roller bearing - Side wear skids - Hardox wear skids, bolt-on - High-tempered spring steel swing protection flaps - Parking stand - Slotted holes in the lower link mounts for better ground adaptation with a uniform cutting surface - Power take-off shaft with hardened inner tube and bushing-bottom lubrication—heavy-duty design - Adjustable Vario cutting bar for setting the degree of shredding - Wear insert in the housing (pre-installed) - High-torque gearbox with freewheel and direct drive for 1,000 rpm The Schwarzmayr sales team would be happy to demonstrate the machine for you and asks that you schedule an appointment to view it at our facility. We’re also here for you on Saturdays until 12:00 p.m.! We’d also be happy to send you a quote via email. We look forward to your visit or inquiry.

No. 71402 Technical Specifications: Working width 280 cm Overall width 300 cm Max. tractor horsepower at 1,000 rpm: 200 PS Weight: 1,112 kg M-Hammer: 24 pieces Standard equipment: - Made of fine-grain QSt/E steel for front and rear mounting with a Category 2 three-point hitch - Hydraulic side shift: 56 cm stroke - Transmission with freewheel and direct drive for 1,000 rpm - Automatic V-belt tensioning - Highly tempered M-Hammer flails, forged from special steel - Smooth-running rotor with specially shaped, spirally arranged tool holders - Screw-on short-chopping bar system: “Shark Fin” Müthing patent - Large, patented swivel support roller for optional material discharge behind or in front of the roller and for adjusting the working height of the mulcher - Robust Starinth® support roller bearing - Side wear skids - Hardox wear skids, bolt-on - High-tempered spring steel swing protection flaps - Parking stand - Slotted holes in the lower link mounts for better ground adaptation with a uniform cutting surface - Power take-off shaft with hardened inner tube and bushing-bottom lubrication—heavy-duty design - Adjustable Vario cutting bar for setting the degree of shredding - Wear insert in the housing (pre-installed) - High-torque gearbox with freewheel and direct drive for 1,000 rpm The Schwarzmayr sales team would be happy to demonstrate the machine for you and asks that you schedule an appointment to view it at our facility. We’re also here for you on Saturdays until 12:00 p.m.! We’d also be happy to send you a quote via email. We look forward to your visit or inquiry.