Müthing AlpinShark Vario 220

Müthing Mulcher Special Offer!
This mulcher is suitable for tractors with up to 90 PS, a speed of 1,000 rpm, and can be mounted on the front or rear.
The unit is equipped as follows:
* Made of fine-grained QSt/E steel for front or rear mounting with a Category 1 + 2 three-point hitch
* Hydraulic side shift
* Transmission with freewheel and direct drive for 1,000 rpm, convertible to 540 rpm
* V-belt guard with inspection opening
* Highly heat-treated M-hammer blades, forged from special steel
* Smooth-running rotor with specially shaped, spirally arranged tool holders
* Screw-on short-chopping bar system: “Shark Fin” – Müthing patent
* Large support roller for adjusting the mulcher’s working height
* Robust Starinth® support roller bearing
* Side wear skids
* Highly tempered spring steel swing protection flaps
* Drive shaft with hardened inner tube and bushing-bottom lubrication
* Adjustable Vario cutting bar for setting the degree of shredding
* Wear insert mounted in the housing (available for an additional charge)
* Ideal for grassland and arable farming
* Promotion valid on the following models:
Front/rear mulcher 2.20 m -> €6,999 incl. VAT plus €220 shipping
Front/rear mulcher 2.50 m -> €8,199 incl. VAT plus €220 shipping
Front/rear mulcher 2.80 m -> €8,699 incl. VAT plus €220 shipping
Side mulcher, 2.20 m -> €11,799, including VAT, plus €220 shipping

Müthing Mulcher Special Offer! This mulcher is suitable for tractors with up to 90 PS, a speed of 1,000 rpm, and can be mounted on the front or rear. The unit is equipped as follows: * Made of fine-grained QSt/E steel for front or rear mounting with a Category 1 + 2 three-point hitch * Hydraulic side shift * Transmission with freewheel and direct drive for 1,000 rpm, convertible to 540 rpm * V-belt guard with inspection opening * Highly heat-treated M-hammer blades, forged from special steel * Smooth-running rotor with specially shaped, spirally arranged tool holders * Screw-on short-chopping bar system: “Shark Fin” – Müthing patent * Large support roller for adjusting the mulcher’s working height * Robust Starinth® support roller bearing * Side wear skids * Highly tempered spring steel swing protection flaps * Drive shaft with hardened inner tube and bushing-bottom lubrication * Adjustable Vario cutting bar for setting the degree of shredding * Wear insert mounted in the housing (available for an additional charge) * Ideal for grassland and arable farming * Promotion valid on the following models: Front/rear mulcher 2.20 m -> €6,999 incl. VAT plus €220 shipping Front/rear mulcher 2.50 m -> €8,199 incl. VAT plus €220 shipping Front/rear mulcher 2.80 m -> €8,699 incl. VAT plus €220 shipping Side mulcher, 2.20 m -> €11,799, including VAT, plus €220 shipping

Müthing Mulcher Special Offer! This mulcher is suitable for tractors with up to 90 PS, a speed of 1,000 rpm, and can be mounted on the front or rear. The unit is equipped as follows: * Made of fine-grained QSt/E steel for front or rear mounting with a Category 1 + 2 three-point hitch * Hydraulic side shift * Transmission with freewheel and direct drive for 1,000 rpm, convertible to 540 rpm * V-belt guard with inspection opening * Highly heat-treated M-hammer blades, forged from special steel * Smooth-running rotor with specially shaped, spirally arranged tool holders * Screw-on short-chopping bar system: “Shark Fin” – Müthing patent * Large support roller for adjusting the mulcher’s working height * Robust Starinth® support roller bearing * Side wear skids * Highly tempered spring steel swing protection flaps * Drive shaft with hardened inner tube and bushing-bottom lubrication * Adjustable Vario cutting bar for setting the degree of shredding * Wear insert mounted in the housing (available for an additional charge) * Ideal for grassland and arable farming * Promotion valid on the following models: Front/rear mulcher 2.20 m -> €6,999 incl. VAT plus €220 shipping Front/rear mulcher 2.50 m -> €8,199 incl. VAT plus €220 shipping Front/rear mulcher 2.80 m -> €8,699 incl. VAT plus €220 shipping Side mulcher, 2.20 m -> €11,799, including VAT, plus €220 shipping