Krone Swadro TC 760 Plus

Krone Swadro TC 760 Plus in the following configuration:
* Working width 680–760 cm, hydraulically adjustable (1xDW required)
* Swath width approx. 100–180 cm
* Transport height: 357 cm (tine arms folded)
* Rotor diameter: 330 cm
* 2 × 13 tine arms (6 foldable)
* Power requirement: approx. 50 PS
* Required hydraulic connections: 1xEW, 1xDW
* Two-point hitch (Cat. I/II) including pendulum suspension via ball eye and roller
* Two-leg parking stand
* Rotor gearbox with maintenance-free grease filling, fully case-hardened KRONE Dura-Max cam track
* Each rotor individually protected by an

Krone Swadro TC 760 Plus in the following configuration: * Working width 680–760 cm, hydraulically adjustable (1xDW required) * Swath width approx. 100–180 cm * Transport height: 357 cm (tine arms folded) * Rotor diameter: 330 cm * 2 × 13 tine arms (6 foldable) * Power requirement: approx. 50 PS * Required hydraulic connections: 1xEW, 1xDW * Two-point hitch (Cat. I/II) including pendulum suspension via ball eye and roller * Two-leg parking stand * Rotor gearbox with maintenance-free grease filling, fully case-hardened KRONE Dura-Max cam track * Each rotor individually protected by an overload clutch * Wide-angle PTO shaft * Robust drive train with freewheel * Cardan-type rotor suspension including KRONE Jet Effect * Tine arms mounted on maintenance-free deep-groove ball bearings * 4 trailing double tines (10.5 mm per arm) with large coil diameter and “lift effect” * Tines mounted around the tine arm to prevent loss * Electro-hydraulic single-rotor lift at the headland * Electric rotor height adjustment * Spring-loaded rotor relief * Axle-mounted forced steering—direct control via the hitch * Center swath belt * etc...... Viewings available at any time by appointment! We look forward to your inquiry!

Krone Swadro TC 760 Plus in the following configuration: * Working width 680–760 cm, hydraulically adjustable (1xDW required) * Swath width approx. 100–180 cm * Transport height: 357 cm (tine arms folded) * Rotor diameter: 330 cm * 2 × 13 tine arms (6 foldable) * Power requirement: approx. 50 PS * Required hydraulic connections: 1xEW, 1xDW * Two-point hitch (Cat. I/II) including pendulum suspension via ball eye and roller * Two-leg parking stand * Rotor gearbox with maintenance-free grease filling, fully case-hardened KRONE Dura-Max cam track * Each rotor individually protected by an overload clutch * Wide-angle PTO shaft * Robust drive train with freewheel * Cardan-type rotor suspension including KRONE Jet Effect * Tine arms mounted on maintenance-free deep-groove ball bearings * 4 trailing double tines (10.5 mm per arm) with large coil diameter and “lift effect” * Tines mounted around the tine arm to prevent loss * Electro-hydraulic single-rotor lift at the headland * Electric rotor height adjustment * Spring-loaded rotor relief * Axle-mounted forced steering—direct control via the hitch * Center swath belt * etc...... Viewings available at any time by appointment! We look forward to your inquiry!