Krampe AS 680 Rambody

No. 73510
Krampe AS 680 RAMBODY Tandem Pusher
Chassis
40 km/h package for Germany, ALB valve, 22 t gross vehicle weight
ZV 22 spring-loaded hitch with K80 ball hitch
Robust hydraulic outrigger, 70 cm stroke, with double-acting cylinder and large footplate,
SIMOL-30
6-2-way valve combination: hydraulic support leg with hydraulic tailgate,
eliminates the need for a double-acting control unit on the tractor
LED lighting system, high-quality 3-chamber taillights with impact-resistant lens
Reinforced parabolic springs with 24 t load capacity, longitudinal control arms for dynamic axle alignment, monitored
on the axle body
BPW axle with 120 mm square axle housing, wheel brakes 410 x 120 mm, track width 1.95 m,
10-hole wheel mounting, wheelbase 1.55 m, 10.0 t single-axle load, automatic link adjusters
AGS
Volume tailgate, large discharge slide 46 x 34 cm, hydraulically deployable underrun protection
with sequential control
to prevent collisions during the final unloading process
High-tilting underrun protection and recovery tow eye as a bracket with a large round hole at the
rear of the vehicle
Body:
Body 6.63 x 2.37 x 1.50 m interior = loading volume 22.3 m³ (water capacity) without silage extension
Volume can be increased to 32. m³ with 30 cm or 60 cm extension side walls
Welded side walls, 3 mm thick, made from a single piece, material S355
Welded floor plate, 4 mm thick, made from a single piece, material S355
The jet construction of the side walls, featuring substantial curves and a very robust
top chord provides enormous stability and ensures a solid, high-quality appearance
Pushing blade with PU seals, chopping flap, 6 viewing windows, each 90 x 40 cm
Hydraulically operated tailgate, lateral pressure applied via adjustable locking wedges
Sturdy, non-slip access ladder on the front wall of the body
Pushing blade:
Rail-guided push plate with three double-acting hydraulic cylinders
Two-part push table (sliding element at the front, fixed element at the rear)
Sturdy,

No. 73510 Krampe AS 680 RAMBODY Tandem Pusher Chassis 40 km/h package for Germany, ALB valve, 22 t gross vehicle weight ZV 22 spring-loaded hitch with K80 ball hitch Robust hydraulic outrigger, 70 cm stroke, with double-acting cylinder and large footplate, SIMOL-30 6-2-way valve combination: hydraulic support leg with hydraulic tailgate, eliminates the need for a double-acting control unit on the tractor LED lighting system, high-quality 3-chamber taillights with impact-resistant lens Reinforced parabolic springs with 24 t load capacity, longitudinal control arms for dynamic axle alignment, monitored on the axle body BPW axle with 120 mm square axle housing, wheel brakes 410 x 120 mm, track width 1.95 m, 10-hole wheel mounting, wheelbase 1.55 m, 10.0 t single-axle load, automatic link adjusters AGS Volume tailgate, large discharge slide 46 x 34 cm, hydraulically deployable underrun protection with sequential control to prevent collisions during the final unloading process High-tilting underrun protection and recovery tow eye as a bracket with a large round hole at the rear of the vehicle Body: Body 6.63 x 2.37 x 1.50 m interior = loading volume 22.3 m³ (water capacity) without silage extension Volume can be increased to 32. m³ with 30 cm or 60 cm extension side walls Welded side walls, 3 mm thick, made from a single piece, material S355 Welded floor plate, 4 mm thick, made from a single piece, material S355 The jet construction of the side walls, featuring substantial curves and a very robust top chord provides enormous stability and ensures a solid, high-quality appearance Pushing blade with PU seals, chopping flap, 6 viewing windows, each 90 x 40 cm Hydraulically operated tailgate, lateral pressure applied via adjustable locking wedges Sturdy, non-slip access ladder on the front wall of the body Pushing blade: Rail-guided push plate with three double-acting hydraulic cylinders Two-part push table (sliding element at the front, fixed element at the rear) Sturdy, replaceable PU seals on the sides and bottom, grain-tight design Large viewing windows with openings measuring 90 x 40 cm each made of perforated sheet metal, 40 x 40 mm perforation Hydraulics and Electrical System: Operating pressure 200 bar, oil requirement 21 liters; no significant amounts of hydraulic oil since all cylinders are double-acting High-quality LED taillights, mounted in a protected position on the tailgate Paint finish: Shot-blasted frame, finished with a two-component paint in a satin gloss Chassis: gray; body: Krampe RED Gross vehicle weight rating: 22,000 kg Technically possible payload: approx. 20,000 kg Curb weight without tires Additional equipment: - Tires: 710/50 R 26.5 FL 630 Ultra BKT 710/50 R 26.5 Height (mm): 1,383 Width (mm): 687 Load Index 170D Max. load capacity per axle 14.5 t / 12.0 t at 4.0 bar 40/65 km/h Weight per axle 512 kg - Warning signs front and rear required for vehicle widths > 2.55 m - Bolted fenders on the body recommended for an overall width exceeding 2.55 m; advised for models with a steering axle - BPW trailing steering axle with shaft pressure disc Axle square 120 mm, wheel brake 410 x 120 mm, track width 2.15 m, 10-hole wheel mounting, AGS, top-mounted brake cylinders. NOTE: Without side fenders; these are available as an option - 32-metric-ton chassis - Aluminum silage body, 6.80 m long, 60 cm high Aluminum silage body, 6.80 m long, 60 cm high, hydraulically folding front wall, not grain-tight, Volume increase: +9.7 m - EU type approval for 40 km/h 40 km/h approval in accordance with EC type approval EU (Regulation) 167/2013 This complete package (net price) includes: - Delivery with COC documents - Type-approved underrun protection at the rear of the vehicle, approved in accordance with EU (Regulation) 208/2015 - Air brake system in accordance with EU (Regulation) 68/2015 - Side marker lights, white front clearance lights, rear position lights Includes registration in the Aust

No. 73510 Krampe AS 680 RAMBODY Tandem Pusher Chassis 40 km/h package for Germany, ALB valve, 22 t gross vehicle weight ZV 22 spring-loaded hitch with K80 ball hitch Robust hydraulic outrigger, 70 cm stroke, with double-acting cylinder and large footplate, SIMOL-30 6-2-way valve combination: hydraulic support leg with hydraulic tailgate, eliminates the need for a double-acting control unit on the tractor LED lighting system, high-quality 3-chamber taillights with impact-resistant lens Reinforced parabolic springs with 24 t load capacity, longitudinal control arms for dynamic axle alignment, monitored on the axle body BPW axle with 120 mm square axle housing, wheel brakes 410 x 120 mm, track width 1.95 m, 10-hole wheel mounting, wheelbase 1.55 m, 10.0 t single-axle load, automatic link adjusters AGS Volume tailgate, large discharge slide 46 x 34 cm, hydraulically deployable underrun protection with sequential control to prevent collisions during the final unloading process High-tilting underrun protection and recovery tow eye as a bracket with a large round hole at the rear of the vehicle Body: Body 6.63 x 2.37 x 1.50 m interior = loading volume 22.3 m³ (water capacity) without silage extension Volume can be increased to 32. m³ with 30 cm or 60 cm extension side walls Welded side walls, 3 mm thick, made from a single piece, material S355 Welded floor plate, 4 mm thick, made from a single piece, material S355 The jet construction of the side walls, featuring substantial curves and a very robust top chord provides enormous stability and ensures a solid, high-quality appearance Pushing blade with PU seals, chopping flap, 6 viewing windows, each 90 x 40 cm Hydraulically operated tailgate, lateral pressure applied via adjustable locking wedges Sturdy, non-slip access ladder on the front wall of the body Pushing blade: Rail-guided push plate with three double-acting hydraulic cylinders Two-part push table (sliding element at the front, fixed element at the rear) Sturdy, replaceable PU seals on the sides and bottom, grain-tight design Large viewing windows with openings measuring 90 x 40 cm each made of perforated sheet metal, 40 x 40 mm perforation Hydraulics and Electrical System: Operating pressure 200 bar, oil requirement 21 liters; no significant amounts of hydraulic oil since all cylinders are double-acting High-quality LED taillights, mounted in a protected position on the tailgate Paint finish: Shot-blasted frame, finished with a two-component paint in a satin gloss Chassis: gray; body: Krampe RED Gross vehicle weight rating: 22,000 kg Technically possible payload: approx. 20,000 kg Curb weight without tires Additional equipment: - Tires: 710/50 R 26.5 FL 630 Ultra BKT 710/50 R 26.5 Height (mm): 1,383 Width (mm): 687 Load Index 170D Max. load capacity per axle 14.5 t / 12.0 t at 4.0 bar 40/65 km/h Weight per axle 512 kg - Warning signs front and rear required for vehicle widths > 2.55 m - Bolted fenders on the body recommended for an overall width exceeding 2.55 m; advised for models with a steering axle - BPW trailing steering axle with shaft pressure disc Axle square 120 mm, wheel brake 410 x 120 mm, track width 2.15 m, 10-hole wheel mounting, AGS, top-mounted brake cylinders. NOTE: Without side fenders; these are available as an option - 32-metric-ton chassis - Aluminum silage body, 6.80 m long, 60 cm high Aluminum silage body, 6.80 m long, 60 cm high, hydraulically folding front wall, not grain-tight, Volume increase: +9.7 m - EU type approval for 40 km/h 40 km/h approval in accordance with EC type approval EU (Regulation) 167/2013 This complete package (net price) includes: - Delivery with COC documents - Type-approved underrun protection at the rear of the vehicle, approved in accordance with EU (Regulation) 208/2015 - Air brake system in accordance with EU (Regulation) 68/2015 - Side marker lights, white front clearance lights, rear position lights Includes registration in the Aust