Fuhrmann FF 10.500 ALPIN 1 TDS10414AL, Schotterklappe

New Tandem 3-Side Tipper with Top-of-the-Line Features
* Gross weight 10,500 kg, payload 7,240 kg
* Interior bed dimensions: Length 4,070 mm, width 2,150 mm
* Base sidewall height: 600 mm, 2 x extension sidewalls at 500 mm
* Viewing grille at the front top
* Rear sidewall raised by 200 mm
* Tie-down bars welded to the inside of the sidewalls (3 at the front, 6 on the left and right)
* Shaped-tube connection at rear walls
* Center bolt at rear can be screwed in
* Integral side wall reinforcement on base side walls
* Fold-down extension walls
* Closed rectangular main frame with central drawbar
* 5 mm steel floor
* Hydraulic 400 mm gravel flap made of Hardox® with 2 cylinders and grain slide
* Shaped-tube brackets on rear wall flap (e.g., for livestock steps)
* 4 lashing recesses recessed into the floor
* Aluminum access ladder at the front
* Central locking on the left and right
* Sturdy bolted corner posts
* Tilt cylinder with lift-limiting valve
* Hydraulic brakes on both axles with load-sensing valve and parking brake
* Fifth-wheel support jack with 2 speeds
* 19.0/45-17 tires with 18 plies, BKT brand
* !!Special platform height—only 99 cm!!
* Mud flaps on the bumper
* 25 km/h model with type approval certificate
We look forward to your inquiry!

New Tandem 3-Side Tipper with Top-of-the-Line Features * Gross weight 10,500 kg, payload 7,240 kg * Interior bed dimensions: Length 4,070 mm, width 2,150 mm * Base sidewall height: 600 mm, 2 x extension sidewalls at 500 mm * Viewing grille at the front top * Rear sidewall raised by 200 mm * Tie-down bars welded to the inside of the sidewalls (3 at the front, 6 on the left and right) * Shaped-tube connection at rear walls * Center bolt at rear can be screwed in * Integral side wall reinforcement on base side walls * Fold-down extension walls * Closed rectangular main frame with central drawbar * 5 mm steel floor * Hydraulic 400 mm gravel flap made of Hardox® with 2 cylinders and grain slide * Shaped-tube brackets on rear wall flap (e.g., for livestock steps) * 4 lashing recesses recessed into the floor * Aluminum access ladder at the front * Central locking on the left and right * Sturdy bolted corner posts * Tilt cylinder with lift-limiting valve * Hydraulic brakes on both axles with load-sensing valve and parking brake * Fifth-wheel support jack with 2 speeds * 19.0/45-17 tires with 18 plies, BKT brand * !!Special platform height—only 99 cm!! * Mud flaps on the bumper * 25 km/h model with type approval certificate We look forward to your inquiry!

New Tandem 3-Side Tipper with Top-of-the-Line Features * Gross weight 10,500 kg, payload 7,240 kg * Interior bed dimensions: Length 4,070 mm, width 2,150 mm * Base sidewall height: 600 mm, 2 x extension sidewalls at 500 mm * Viewing grille at the front top * Rear sidewall raised by 200 mm * Tie-down bars welded to the inside of the sidewalls (3 at the front, 6 on the left and right) * Shaped-tube connection at rear walls * Center bolt at rear can be screwed in * Integral side wall reinforcement on base side walls * Fold-down extension walls * Closed rectangular main frame with central drawbar * 5 mm steel floor * Hydraulic 400 mm gravel flap made of Hardox® with 2 cylinders and grain slide * Shaped-tube brackets on rear wall flap (e.g., for livestock steps) * 4 lashing recesses recessed into the floor * Aluminum access ladder at the front * Central locking on the left and right * Sturdy bolted corner posts * Tilt cylinder with lift-limiting valve * Hydraulic brakes on both axles with load-sensing valve and parking brake * Fifth-wheel support jack with 2 speeds * 19.0/45-17 tires with 18 plies, BKT brand * !!Special platform height—only 99 cm!! * Mud flaps on the bumper * 25 km/h model with type approval certificate We look forward to your inquiry!