Fliegl Gigant 220cm Kippmulde / Heckschaufel

Fliegl giant rear and high-tipping shovel with a width of 2.2 m

Furnishing:
» Triple mount for forklift, three-point and Euronorm mount
» Very well suited as a high-tipping shovel, tipping angle approx. 111°
» Galvanized support frame, painted tub (nova grey)
» Higher overload than with a conventional dump bucket
» Bearing with plain bearing bushes
» Flexible folding wall: can be used as an extension of the loading area or as a rear wall extension by repositioning it
» Scraper bar made of HB 500, screwable,

Fliegl giant rear and high-tipping shovel with a width of 2.2 m Furnishing: » Triple mount for forklift, three-point and Euronorm mount » Very well suited as a high-tipping shovel, tipping angle approx. 111° » Galvanized support frame, painted tub (nova grey) » Higher overload than with a conventional dump bucket » Bearing with plain bearing bushes » Flexible folding wall: can be used as an extension of the loading area or as a rear wall extension by repositioning it » Scraper bar made of HB 500, screwable, bevelled, made from one piece - mounted with special countersunk screws, thus flush with the scraper bar » Quick and easy locking of the folding wall Technical details: » Volume: approx. 1.10 m³ » With flexible folding wall: 1140 mm deep, inside 500/430 mm high » Forklift carrier: internal width 148 mm; is at the same time the storage of the tipping mechanism, making it particularly robust » 2-cylinder system » Max. load: 2.5 tons. » 1 double-acting connection

Fliegl giant rear and high-tipping shovel with a width of 2.2 m Furnishing: » Triple mount for forklift, three-point and Euronorm mount » Very well suited as a high-tipping shovel, tipping angle approx. 111° » Galvanized support frame, painted tub (nova grey) » Higher overload than with a conventional dump bucket » Bearing with plain bearing bushes » Flexible folding wall: can be used as an extension of the loading area or as a rear wall extension by repositioning it » Scraper bar made of HB 500, screwable, bevelled, made from one piece - mounted with special countersunk screws, thus flush with the scraper bar » Quick and easy locking of the folding wall Technical details: » Volume: approx. 1.10 m³ » With flexible folding wall: 1140 mm deep, inside 500/430 mm high » Forklift carrier: internal width 148 mm; is at the same time the storage of the tipping mechanism, making it particularly robust » 2-cylinder system » Max. load: 2.5 tons. » 1 double-acting connection

Mr.
Michael Flieher

+43 7724 *******

(Call advisor)

Your message to the seller

Send inquiry