Fliegl 3-Achs Tieflader

No. 69151 - First registration on July 20, 2026

3-axle low-loader trailer with offset
Chassis
- Welded steel construction
- Pivot mount with heavy-duty ball bearing swivel ring
- Foldable rear support
- 2 wheel chocks with holders
- Aluminum side impact protection
- Rear mud flaps across the entire width
- Half-shell fenders on the 1st axle with anti-splash flaps; anti-splash flaps behind the 2nd and 3rd axles
- 1 spare tire holder for 1 electric bike, with tire mounting kit
- 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm
- Extendable width extensions up to 3,000 mm (not on rear bevel)
- Storage compartment for wooden planks in the center of the cargo area
- 70 mm wooden planks for widening to 3,000 mm
Lashing eyes on low-loader
- 1 pair of lashing cutouts recessed into the front longitudinal beam at the bend, 10 metric tons each
- 4 pairs of lashing holes in the outer frame, each rated at 5 to. (for securing straps)
- 7 pairs of lashing studs recessed into the top and sides of the outer frame, each rated at 10 metric tons
- 1 x at the front on the crankshaft
- 6 x in the low-profile bed
- 5 pairs of stanchion pockets recessed into the outer frame
- 2 pairs of additional folding lashing eyes, each rated at 10 to: 1 x on the cranked section (protruding) and 1 x recessed into the floor behind the last axle
Towing Equipment for Trailer Turntable
- Towing fork with certified 40 mm tow eye
Axles + Suspension
- SAF drum brake axles
- “Axles/chassis laser-measured” to reduce

No. 69151 - First registration on July 20, 2026 3-axle low-loader trailer with offset Chassis - Welded steel construction - Pivot mount with heavy-duty ball bearing swivel ring - Foldable rear support - 2 wheel chocks with holders - Aluminum side impact protection - Rear mud flaps across the entire width - Half-shell fenders on the 1st axle with anti-splash flaps; anti-splash flaps behind the 2nd and 3rd axles - 1 spare tire holder for 1 electric bike, with tire mounting kit - 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm - Extendable width extensions up to 3,000 mm (not on rear bevel) - Storage compartment for wooden planks in the center of the cargo area - 70 mm wooden planks for widening to 3,000 mm Lashing eyes on low-loader - 1 pair of lashing cutouts recessed into the front longitudinal beam at the bend, 10 metric tons each - 4 pairs of lashing holes in the outer frame, each rated at 5 to. (for securing straps) - 7 pairs of lashing studs recessed into the top and sides of the outer frame, each rated at 10 metric tons - 1 x at the front on the crankshaft - 6 x in the low-profile bed - 5 pairs of stanchion pockets recessed into the outer frame - 2 pairs of additional folding lashing eyes, each rated at 10 to: 1 x on the cranked section (protruding) and 1 x recessed into the floor behind the last axle Towing Equipment for Trailer Turntable - Towing fork with certified 40 mm tow eye Axles + Suspension - SAF drum brake axles - “Axles/chassis laser-measured” to reduce tire wear and fuel consumption - Air suspension with lift & lower valve Wheels and Tires - 235/75 R 17.5” - Twin steel rims, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - Vehicle stability control system - Axle load detection via EBS CAN bus signal, for display in the cab; truck must be pre-equipped accordingly; no truck installation (no calibrated scale) - 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, - 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable - Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! - “TPMS” tire pressure monitoring system according to ECE R 141, displayed on the tractor unit’s screen via EBS; not installed on the truck.(The truck must be equipped for this), Electrical System - 24-volt, multi-chamber lights, yellow LED side lighting (with 12/24V voltage converter) - 2 white front position lights - 2 white/red lane-keeping lights at the rear - 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, - 1 LED rotating beacon with mount, activated via parking lights (removable light) - 2 pairs of warning signs with dual LED lighting, extendable to 3,000 mm Floor - Front step with steel/checker plate covering - Storage compartment recessed into the ramp leading to the step followed by a 70 mm softwood floor; steel/checker plate covering in the wheel well area - Rear ramp with 70 mm softwood floor - Low-load deck, including rear ramp: 6,500 mm Loading ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Additional ramp lock, foldable at the bottom (to prevent the ramps from sliding sideways; not compatible with lateral hydraulic ramp adjustment), covered with wood - Hydraulically operated via tractor PTO with throttle; control located on the left side at the rear - Hydraulic connection with SVK coupler, size 10/3, including connecting hose Country of Registration / Plates - Type approval according to EC 2007/46 + registration in the Austrian database - Prepared for two-line license plate holder - Contour markings with reflective strips according to ECE R 048, white on the sides and red at the rear - Warning sign in accordance with ECE 70 Paint finish - Frame: hot-dip galvanized, including passivation - Drawbar: galvanized or black, at the manufacturer’s discretion - Access ramps:

No. 69151 - First registration on July 20, 2026 3-axle low-loader trailer with offset Chassis - Welded steel construction - Pivot mount with heavy-duty ball bearing swivel ring - Foldable rear support - 2 wheel chocks with holders - Aluminum side impact protection - Rear mud flaps across the entire width - Half-shell fenders on the 1st axle with anti-splash flaps; anti-splash flaps behind the 2nd and 3rd axles - 1 spare tire holder for 1 electric bike, with tire mounting kit - 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm - Extendable width extensions up to 3,000 mm (not on rear bevel) - Storage compartment for wooden planks in the center of the cargo area - 70 mm wooden planks for widening to 3,000 mm Lashing eyes on low-loader - 1 pair of lashing cutouts recessed into the front longitudinal beam at the bend, 10 metric tons each - 4 pairs of lashing holes in the outer frame, each rated at 5 to. (for securing straps) - 7 pairs of lashing studs recessed into the top and sides of the outer frame, each rated at 10 metric tons - 1 x at the front on the crankshaft - 6 x in the low-profile bed - 5 pairs of stanchion pockets recessed into the outer frame - 2 pairs of additional folding lashing eyes, each rated at 10 to: 1 x on the cranked section (protruding) and 1 x recessed into the floor behind the last axle Towing Equipment for Trailer Turntable - Towing fork with certified 40 mm tow eye Axles + Suspension - SAF drum brake axles - “Axles/chassis laser-measured” to reduce tire wear and fuel consumption - Air suspension with lift & lower valve Wheels and Tires - 235/75 R 17.5” - Twin steel rims, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - Vehicle stability control system - Axle load detection via EBS CAN bus signal, for display in the cab; truck must be pre-equipped accordingly; no truck installation (no calibrated scale) - 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, - 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable - Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! - “TPMS” tire pressure monitoring system according to ECE R 141, displayed on the tractor unit’s screen via EBS; not installed on the truck.(The truck must be equipped for this), Electrical System - 24-volt, multi-chamber lights, yellow LED side lighting (with 12/24V voltage converter) - 2 white front position lights - 2 white/red lane-keeping lights at the rear - 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, - 1 LED rotating beacon with mount, activated via parking lights (removable light) - 2 pairs of warning signs with dual LED lighting, extendable to 3,000 mm Floor - Front step with steel/checker plate covering - Storage compartment recessed into the ramp leading to the step followed by a 70 mm softwood floor; steel/checker plate covering in the wheel well area - Rear ramp with 70 mm softwood floor - Low-load deck, including rear ramp: 6,500 mm Loading ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Additional ramp lock, foldable at the bottom (to prevent the ramps from sliding sideways; not compatible with lateral hydraulic ramp adjustment), covered with wood - Hydraulically operated via tractor PTO with throttle; control located on the left side at the rear - Hydraulic connection with SVK coupler, size 10/3, including connecting hose Country of Registration / Plates - Type approval according to EC 2007/46 + registration in the Austrian database - Prepared for two-line license plate holder - Contour markings with reflective strips according to ECE R 048, white on the sides and red at the rear - Warning sign in accordance with ECE 70 Paint finish - Frame: hot-dip galvanized, including passivation - Drawbar: galvanized or black, at the manufacturer’s discretion - Access ramps: