Fiedler Frontlausleger FFA700

No. 56977
Front boom
Approx. 200 operating hours; manufactured in 2022
Mounting requirements:
- Mounting plate size 3 or 5 (or similar)
- Hydraulic flow for cylinder control: 20 l/min at 180 bar
- Front PTO at 1,000 min-1 to power the unit’s own oil supply
- Axle support
- Counterweight: approx. 1,400 kg
- On-board voltage: 12 V
Depending on the carrier vehicle’s equipment, additional options—
which incur extra charges—may be required.
- Without oil supply
- Max. outreach: 7.00 m from the center of the vehicle (when working with a flail mower head)
- Weight: 1,300 kg
- Electro-hydraulic proportional control
==> via FMC multifunction display (standard) and multifunction joystick
- Operation possible on both the right and left sides
- Painted sliding frame with sliding surfaces 2.60 m – effective lateral slide 1.85 m
- Adjustable prism guides in the sliding section
- For optimal visibility into the work area, the boom can be swiveled 25°
forward
- Double-acting hydraulic collision protection with automatic forward and
reverse swiveling back to the starting position
- Electrically activated hydraulic ground pressure relief for the extension arm
- High-quality axial piston pump enables operation at low engine speeds
(the PTO speed during mowing is only 600–700 min⁻¹)
- Electric activation of the oil flow
- Driven by front PTO at 1,000 min⁻¹
-

No. 56977 Front boom Approx. 200 operating hours; manufactured in 2022 Mounting requirements: - Mounting plate size 3 or 5 (or similar) - Hydraulic flow for cylinder control: 20 l/min at 180 bar - Front PTO at 1,000 min-1 to power the unit’s own oil supply - Axle support - Counterweight: approx. 1,400 kg - On-board voltage: 12 V Depending on the carrier vehicle’s equipment, additional options— which incur extra charges—may be required. - Without oil supply - Max. outreach: 7.00 m from the center of the vehicle (when working with a flail mower head) - Weight: 1,300 kg - Electro-hydraulic proportional control ==> via FMC multifunction display (standard) and multifunction joystick - Operation possible on both the right and left sides - Painted sliding frame with sliding surfaces 2.60 m – effective lateral slide 1.85 m - Adjustable prism guides in the sliding section - For optimal visibility into the work area, the boom can be swiveled 25° forward - Double-acting hydraulic collision protection with automatic forward and reverse swiveling back to the starting position - Electrically activated hydraulic ground pressure relief for the extension arm - High-quality axial piston pump enables operation at low engine speeds (the PTO speed during mowing is only 600–700 min⁻¹) - Electric activation of the oil flow - Driven by front PTO at 1,000 min⁻¹ - Weight: approx. 120 kg 1 oil cooler (7 kW) with 12 V electric fan on the front oil supply Note: For retrofitting, a 12 V / 20 A continuous-current power outlet on the front is required 1 stainless steel rail with felt oilers 1 lighting unit with warning signs and position lights 1 CAN-BUS-based Copytronic (ground pressure control) - Measurement of contact forces via pressure sensor - Preset arm relief - Automatic copying control 1 FSMK 1250SR flail mower head, heavy-duty version for grass/undergrowth up to Ø 4 cm - 1.25 m working width - Belt drive - Lubricatable support roller, reinforced on the left and right, for cutting height adjustment - Double stone impact protection (plastic impact plates and chain guard) at the front - Simple impact protection (rubber skirt) at the rear - 24 blades, twisted - 300 kg 1 adapter plate for rigid mounting plate DIN 3 / 5 Used, from buyback; 20% VAT The sales team at Schwarzmayr would be happy to show you the equipment/machine and asks that you schedule an appointment to view it at our facility. We’re also here for you on Saturdays until 12:00 p.m.! We’d also be happy to send you a quote via email. We look forward to your visit or inquiry.

No. 56977 Front boom Approx. 200 operating hours; manufactured in 2022 Mounting requirements: - Mounting plate size 3 or 5 (or similar) - Hydraulic flow for cylinder control: 20 l/min at 180 bar - Front PTO at 1,000 min-1 to power the unit’s own oil supply - Axle support - Counterweight: approx. 1,400 kg - On-board voltage: 12 V Depending on the carrier vehicle’s equipment, additional options— which incur extra charges—may be required. - Without oil supply - Max. outreach: 7.00 m from the center of the vehicle (when working with a flail mower head) - Weight: 1,300 kg - Electro-hydraulic proportional control ==> via FMC multifunction display (standard) and multifunction joystick - Operation possible on both the right and left sides - Painted sliding frame with sliding surfaces 2.60 m – effective lateral slide 1.85 m - Adjustable prism guides in the sliding section - For optimal visibility into the work area, the boom can be swiveled 25° forward - Double-acting hydraulic collision protection with automatic forward and reverse swiveling back to the starting position - Electrically activated hydraulic ground pressure relief for the extension arm - High-quality axial piston pump enables operation at low engine speeds (the PTO speed during mowing is only 600–700 min⁻¹) - Electric activation of the oil flow - Driven by front PTO at 1,000 min⁻¹ - Weight: approx. 120 kg 1 oil cooler (7 kW) with 12 V electric fan on the front oil supply Note: For retrofitting, a 12 V / 20 A continuous-current power outlet on the front is required 1 stainless steel rail with felt oilers 1 lighting unit with warning signs and position lights 1 CAN-BUS-based Copytronic (ground pressure control) - Measurement of contact forces via pressure sensor - Preset arm relief - Automatic copying control 1 FSMK 1250SR flail mower head, heavy-duty version for grass/undergrowth up to Ø 4 cm - 1.25 m working width - Belt drive - Lubricatable support roller, reinforced on the left and right, for cutting height adjustment - Double stone impact protection (plastic impact plates and chain guard) at the front - Simple impact protection (rubber skirt) at the rear - 24 blades, twisted - 300 kg 1 adapter plate for rigid mounting plate DIN 3 / 5 Used, from buyback; 20% VAT The sales team at Schwarzmayr would be happy to show you the equipment/machine and asks that you schedule an appointment to view it at our facility. We’re also here for you on Saturdays until 12:00 p.m.! We’d also be happy to send you a quote via email. We look forward to your visit or inquiry.