Bucher TGM 18250 Bucher

Odometer reading: 66,228,
Curb weight: 18,000 kg,
First registration: June 23, 2016,
Diesel,
self-propelled
________
Standard Base Equipment:
Fan Unit
- Hydraulic fan drive via a chassis-mounted, transmission-independent power take-off
(semi-hydrostatic drive)
- Hydraulic fan drive
- Hydraulic oil tank, 50 l
- Engine compartment lined with sound-insulating material
- Fan exhaust air routed upward through the hopper front section
- Hydraulic pump, single-acting
Sweepings hopper
- Sweepings hopper (with tailgate and screen) and water tank made of 1.4003 chrome steel; engine compartment lining made of carbon steel
- Sweepings hopper gross volume: 6.5 m³
- Debris hopper floor made of chromium-alloyed stainless steel, 1.4301
- Debris hopper tilt angle: approx. 55 degrees
- Debris chute made of chromium steel, 1.4003
- Inspection hatches on the right and left
- Dirty water drain 4", A-coupling
- Air intake screen, manually foldable
- 2 rotating beacon lights at the rear on the debris container
- Air shut-off valve on the suction hose, pneumatically operated
- Multi-stage stabilizing support, pneumatically operated
- Marker lights at the rear of the hopper, side marker lights
- Integrated water tank
- Pre-equipped for rear suction hose boom or roof-mounted configuration
- Side marker lights
Debris Collection
- Debris collection hopper with wear-resistant coating
- Coarse debris collection via tilting of the suction nozzle
- Suction hose diameter: 250 mm
- Push-type disc brushes
- Hydraulically driven disc brushes, steel
- Disc brushes, steel, 500 mm diameter, towed
- Stepless speed control for disc brushes
- Two robust swiveling trailing wheels
- Automatic lifting of the sweeping units when reversing
- Work lights for sweeping unit
Roller brush
- Roller brush

Odometer reading: 66,228, Curb weight: 18,000 kg, First registration: June 23, 2016, Diesel, self-propelled ________ Standard Base Equipment: Fan Unit - Hydraulic fan drive via a chassis-mounted, transmission-independent power take-off (semi-hydrostatic drive) - Hydraulic fan drive - Hydraulic oil tank, 50 l - Engine compartment lined with sound-insulating material - Fan exhaust air routed upward through the hopper front section - Hydraulic pump, single-acting Sweepings hopper - Sweepings hopper (with tailgate and screen) and water tank made of 1.4003 chrome steel; engine compartment lining made of carbon steel - Sweepings hopper gross volume: 6.5 m³ - Debris hopper floor made of chromium-alloyed stainless steel, 1.4301 - Debris hopper tilt angle: approx. 55 degrees - Debris chute made of chromium steel, 1.4003 - Inspection hatches on the right and left - Dirty water drain 4", A-coupling - Air intake screen, manually foldable - 2 rotating beacon lights at the rear on the debris container - Air shut-off valve on the suction hose, pneumatically operated - Multi-stage stabilizing support, pneumatically operated - Marker lights at the rear of the hopper, side marker lights - Integrated water tank - Pre-equipped for rear suction hose boom or roof-mounted configuration - Side marker lights Debris Collection - Debris collection hopper with wear-resistant coating - Coarse debris collection via tilting of the suction nozzle - Suction hose diameter: 250 mm - Push-type disc brushes - Hydraulically driven disc brushes, steel - Disc brushes, steel, 500 mm diameter, towed - Stepless speed control for disc brushes - Two robust swiveling trailing wheels - Automatic lifting of the sweeping units when reversing - Work lights for sweeping unit Roller brush - Roller brush suspension, towed - Brush length 1,300 mm, brush diameter 406 mm with plastic bristles (Depending on chassis) - Hydraulically driven roller brush - Discharge-limiting skirt for roller brush unit Water system - Water tank capacity approx. 1,554 l - Water tank made of chrome steel, 1.4003 with coating - Water level gauge in the cab - Water filling device, Storz C (2"), right side - Manual water filling devices, right and left sides - Water pump, hydraulically driven - Automatic water shut-off when sweeping units are raised - Spray water connection, 3/4", rear right - Water blow-out system - Electric water valves in the cab - 2-nozzle low-pressure front nozzle bar Instrument Panel and Control Console - Bucher instrument panel, incl. 7" color display - Ergonomic control unit, mounted on the driver’s door, equipped with the main functions - Display includes the following functions: Water level indicator, operating hours, and rear axle load - Warning and indicator lights for rear axle load - Monitoring and control unit for regulating broom contact pressure (broom relief), stepless speed control of the disc brooms - Electric valves for the water system, operated from the cab. - Control of the debris hopper functions via a wired remote control from the cab, but also possible from outside. - Air intake screen actuation, operated at the rear right of the vehicle - Rear axle load overload indicator, warning light on the display (optional for air-suspension chassis). - Warning light when the debris hopper is raised Paint finish - Exterior of debris container: RAL 2010 - Debris collection unit: RAL 7021 - Subframe: RAL 7021 Body Accessories - Water fill hose, Storz C(2"), 3 m long - Red/white warning markings per DIN 30710 on reflective film - Pneumatic vibrating screens - Stainless steel chain curtain inside the hopper - Rear suction hose with 200 mm diameter extension - Rubberized and wear-resistant suction nozzle - LED work lights - Additional LED work lights at the rear on the hopper roof - Backup camera and an auxiliary camera - Disc brush, 650 mm - Side brush adjustment - Disc brush angle adjustment - High-performance wheels and bearings—for the suction nozzle - Adjustable disc brush pressure via a control valve in the cab - Quick-change system for the center sweeping roller - Coarse debris collection by tilting the suction nozzle

Odometer reading: 66,228, Curb weight: 18,000 kg, First registration: June 23, 2016, Diesel, self-propelled ________ Standard Base Equipment: Fan Unit - Hydraulic fan drive via a chassis-mounted, transmission-independent power take-off (semi-hydrostatic drive) - Hydraulic fan drive - Hydraulic oil tank, 50 l - Engine compartment lined with sound-insulating material - Fan exhaust air routed upward through the hopper front section - Hydraulic pump, single-acting Sweepings hopper - Sweepings hopper (with tailgate and screen) and water tank made of 1.4003 chrome steel; engine compartment lining made of carbon steel - Sweepings hopper gross volume: 6.5 m³ - Debris hopper floor made of chromium-alloyed stainless steel, 1.4301 - Debris hopper tilt angle: approx. 55 degrees - Debris chute made of chromium steel, 1.4003 - Inspection hatches on the right and left - Dirty water drain 4", A-coupling - Air intake screen, manually foldable - 2 rotating beacon lights at the rear on the debris container - Air shut-off valve on the suction hose, pneumatically operated - Multi-stage stabilizing support, pneumatically operated - Marker lights at the rear of the hopper, side marker lights - Integrated water tank - Pre-equipped for rear suction hose boom or roof-mounted configuration - Side marker lights Debris Collection - Debris collection hopper with wear-resistant coating - Coarse debris collection via tilting of the suction nozzle - Suction hose diameter: 250 mm - Push-type disc brushes - Hydraulically driven disc brushes, steel - Disc brushes, steel, 500 mm diameter, towed - Stepless speed control for disc brushes - Two robust swiveling trailing wheels - Automatic lifting of the sweeping units when reversing - Work lights for sweeping unit Roller brush - Roller brush suspension, towed - Brush length 1,300 mm, brush diameter 406 mm with plastic bristles (Depending on chassis) - Hydraulically driven roller brush - Discharge-limiting skirt for roller brush unit Water system - Water tank capacity approx. 1,554 l - Water tank made of chrome steel, 1.4003 with coating - Water level gauge in the cab - Water filling device, Storz C (2"), right side - Manual water filling devices, right and left sides - Water pump, hydraulically driven - Automatic water shut-off when sweeping units are raised - Spray water connection, 3/4", rear right - Water blow-out system - Electric water valves in the cab - 2-nozzle low-pressure front nozzle bar Instrument Panel and Control Console - Bucher instrument panel, incl. 7" color display - Ergonomic control unit, mounted on the driver’s door, equipped with the main functions - Display includes the following functions: Water level indicator, operating hours, and rear axle load - Warning and indicator lights for rear axle load - Monitoring and control unit for regulating broom contact pressure (broom relief), stepless speed control of the disc brooms - Electric valves for the water system, operated from the cab. - Control of the debris hopper functions via a wired remote control from the cab, but also possible from outside. - Air intake screen actuation, operated at the rear right of the vehicle - Rear axle load overload indicator, warning light on the display (optional for air-suspension chassis). - Warning light when the debris hopper is raised Paint finish - Exterior of debris container: RAL 2010 - Debris collection unit: RAL 7021 - Subframe: RAL 7021 Body Accessories - Water fill hose, Storz C(2"), 3 m long - Red/white warning markings per DIN 30710 on reflective film - Pneumatic vibrating screens - Stainless steel chain curtain inside the hopper - Rear suction hose with 200 mm diameter extension - Rubberized and wear-resistant suction nozzle - LED work lights - Additional LED work lights at the rear on the hopper roof - Backup camera and an auxiliary camera - Disc brush, 650 mm - Side brush adjustment - Disc brush angle adjustment - High-performance wheels and bearings—for the suction nozzle - Adjustable disc brush pressure via a control valve in the cab - Quick-change system for the center sweeping roller - Coarse debris collection by tilting the suction nozzle