Bressel & Lade Ballenschneidschaufel

Bressel und Lade B&L Bale-Cutting Shovel / Bale-Cutting Pliers
The bale-cutting shovel is designed to cut silage bales. The shovel can be used to remove corn silage. It is possible to remove silage from the wall with the upper jaw open.


• 1630 mm – 2470 mm width
• 800–1200 L capacity
• With highly wear-resistant scraper bar (150 x 20 mm, 500 HB)
• Bucket height 650 mm, bucket depth 850 mm
• With 1 or 2 internal stiffeners
• With bolted, serrated front cutting edge
•

Bressel und Lade B&L Bale-Cutting Shovel / Bale-Cutting Pliers The bale-cutting shovel is designed to cut silage bales. The shovel can be used to remove corn silage. It is possible to remove silage from the wall with the upper jaw open. • 1630 mm – 2470 mm width • 800–1200 L capacity • With highly wear-resistant scraper bar (150 x 20 mm, 500 HB) • Bucket height 650 mm, bucket depth 850 mm • With 1 or 2 internal stiffeners • With bolted, serrated front cutting edge • With 2 hydraulic cylinders (max. working pressure 220 bar) for the cutting frame • Opening width approx. 1450 mm • Euro mount (other mounts available upon request) - The width should be at least 1840 mm if silage bales are to be cut. I look forward to showing you the machine in detail or, if necessary, demonstrating it in Burgkirchen, at Austria’s largest demonstration site. To ensure I can set aside enough time for you, please contact me by phone or email to schedule an appointment. Melanie Holzner #TeamMauch

Bressel und Lade B&L Bale-Cutting Shovel / Bale-Cutting Pliers The bale-cutting shovel is designed to cut silage bales. The shovel can be used to remove corn silage. It is possible to remove silage from the wall with the upper jaw open. • 1630 mm – 2470 mm width • 800–1200 L capacity • With highly wear-resistant scraper bar (150 x 20 mm, 500 HB) • Bucket height 650 mm, bucket depth 850 mm • With 1 or 2 internal stiffeners • With bolted, serrated front cutting edge • With 2 hydraulic cylinders (max. working pressure 220 bar) for the cutting frame • Opening width approx. 1450 mm • Euro mount (other mounts available upon request) - The width should be at least 1840 mm if silage bales are to be cut. I look forward to showing you the machine in detail or, if necessary, demonstrating it in Burgkirchen, at Austria’s largest demonstration site. To ensure I can set aside enough time for you, please contact me by phone or email to schedule an appointment. Melanie Holzner #TeamMauch