Echipamente municipal – Austria Inferioară

• An fab. 2018

Nr. 40365 Vario - Schneepflug - mit Räumbreite gerade 2, 80m - mit Scharhöhe 1, 10m - mit Anstellwinkel max. 35° - mit Räumbreite bei 30° 2, 50m - mit Kommunalp

• An fab. 2024

Part No.: 71421 Hydrac Disc Spreader - for salt and grit - with 3-point hitch - with 750-liter hopper - driven by a drive shaft, including drive shaft - with d

• An fab. 2023

Sehr guter Zustand Stekro Schneepflug 260cm Schneeschild 3 Punkt Aufnahme hydraulische Schwenkfunktion (links/rechts) über doppeltwirkende Zylin

• An fab. 2021

No. 70413 BM6212V Slope Mower with Proportional Joystick - Year of manufacture: 2021, like-new condition, used once - Hedge mower mounted on a Cat. III 3-point h

• An fab. 2022

1 pair of snow chains 10.0/75-15.3 REX Municipal equipment Winter service equipment

• An fab. 2006
• 5 h

KMV Snow Blower 1200 - without drive Municipal equipment Winter service equipment

• An fab. 2026

Amazone Ice Tiger Features: - Three-point hitch - 1, 000 L capacity - Powered by tractor hydraulics - Control system without brine technology - Manual spray pattern

• 22 CP/16 kW
• An fab. 2023
• 150 h

EDV 62605 Lawn Care - Tractor - with a 3-cylinder Stage V diesel engine and 22 PS - with a 21-liter fuel tank - with fully hydraulic steering - with SCMA48 mid-

• 27 CP/20 kW
• An fab. 2023

No. 61406 Zero-Turn Lawn Tractor Ferris IS 800, 27 PS, 2-cyl., 132 cm iCD Rear discharge with patented suspension - Engine: Air-cooled, electric PTO clutch, - Fu

No. 59688 - New Machine Reversible Vibratory Plate Weight: 430 kg Centrifugal Force: 55 kN Plate Width: 75 cm Plate Length: 91 cm Frequency: 71 Hz Engine: Hatz 1D4

• An fab. 2025

Features: - Two-coat special paint finish - Stepless material metering via auger - Stepless material distribution via spreading disc - Hydraulic self-loading mechan

• An fab. 2022
• 200 h

No. 56977 Front boom Approx. 200 operating hours; manufactured in 2022 Mounting requirements: - Mounting plate size 3 or 5 (or similar) - Hydraulic flow for cylind

• An fab. 2024

Features: - Three-point hitch - Hydraulic slide gate - Manual spread width adjustment - Lighting system - PTO drive The machine is in stock in Burgkirchen. So t

• An fab. 2026

No. 76335 Municipal Spreader - with a hopper capacity of 500 liters - with hydraulic slide gate - with a spreading width of 1.5 m – 9.0 m - with power take-off

• An fab. 2026

No. 72032 Single-disc municipal spreader - with an 800-liter stainless steel hopper, powder-coated in RAL 9006, - with a spreading width of 1.5–9 m, - with agitat

• An fab. 2002

Features: - 3.0 m working width - Skids - Coupling plates - attachment - 3-piece design - Snow dust guard - Overload protection - Snow deflector - Lifting mechanis

• 50 CP/37 kW
• An fab. 2022
• 140 h

Irus Deltrak 50V3 - Track chains with metal links - Separately extendable tracks - Additional DW hydraulic connection - LED work lights - XHD 130 brush cutter Muni

• An fab. 2015
• 150 h

Used Bema 700 Snow Plow - 2050 mm - Weidemann mounting - Spring-loaded folding segment - Wheels - Hydraulically swiveling Municipal equipment Winter service equipm

• 2024 h

Lehner Polaro Spreader - 70, 110, or 170 liters - Working width continuously adjustable from 0.8 to 6.0 m - Frame, slide, and spreading disc made of stainless steel

• An fab. 2025

Features: - Two-coat special paint finish - Continuously variable spread material metering via auger - Continuously variable spread material application via spreadi

• An fab. 2025

Features: You can choose between a Merlo attachment or a standard coupling plate attachment! - Automatic safety feature via pre-tensioned, high-rising plowshares -

Used Snow Plow - 1500 mm - Weidemann mounting - Mechanically swiveling - Steel scraper bar - Fixed sliding plate - Breakaway mechanism with shear pin Municipal eq

• An fab. 2011

Used Bema Sweeper Attachment - Weidemann MV plate mount - mechanical tilt adjustment - with roller leveling - compatible with Bema 20, 25.... Municipal equipment

• An fab. 2026

Farm Tractor / Farm Loader Weidemann 1260LP New Machine with Top-of-the-Line Standard Equipment: - Perkins 3-cylinder engine - 25 PS Stage V without AdBlue, DOC, d

• An fab. 2026

Features: - Euro and three-point hitch - Lighting - Collision protection - Fabric scraper bar - Weight: 195 kg - Hydraulic steering angles (left and right) - Worki

• An fab. 2026

Features: - Euro and three-point hitch - Hydraulic steering angle adjustment (left and right) - Working width: 2.8 m - Collision protection - Weight: 440 kg - Ligh

• An fab. 2026

Features: - With collision protection - Working width: 2.9 m - Weight: 520 kg - Requires 50 PS or more - Euro and three-point hitch - Lighting - Hydraulic steering

• An fab. 2026

Features: - Collision protection - Working width: 2.7 m - Weight: 500 kg - Minimum power: 50 PS - Euro and three-point hitch - Lighting - Hydraulic steering angle a

• An fab. 2026

Features: - Three-point hitch - Hydraulically driven - Lighting - Mechanically adjustable spread rate - Long hydraulic top link - Curb weight: 514 kg The machine

SATEX Kehrmaschine GT 1600 -Zentrale Bürstenhöhenverstellung -Schwere Laufräder -BMS Hydraulikmotore -Elektrische Steuerung -Nur ein DW Steuergerät notwendig -

• An fab. 2026

No. 76086 Salt spreader with PTO drive, 540 rpm with maintenance-free oil-bath gearbox with drive shaft with manually adjustable spread rate limiter made of stainle

• 27 CP/20 kW
• An fab. 2026
• 45 h

A Jack with a sickle mower, in like-new condition, is for sale! Municipal equipment Hedge mowers

• An fab. 2011

Features: - Skids - Three-point hitch - Marker lights - Overload protection - Weight: 900 kg - V-shape - Requires 2 DW control units - Working width: 3.18–3.6 m

• An fab. 2026

Greentec Puma 2803 Tele + LRS1602 Branch Saw - Hydraulic multi-purpose attachment with branch saw for tractors, loaders, and excavators - 1.4–2.2 m reach - 1, 600 m

• An fab. 2026

Irus XDH 130 Brush Cutter Municipal equipment Hedge mowers

• 50 CP/37 kW
• An fab. 2026

IRUS DELTRAK 50V3 + XHD 130 Flail Mower - Radio-controlled tracked carrier with professional flail mower - 50 PS / 37 kW Doosan turbo diesel - 1, 300 mm working wid

• An fab. 2019
• 50 h

IRUS FM 125 Forest Mulcher Demonstration Model Quick-change system/attachment triangle Rigid pressure device 125 oscillating tools Municipal equipment Hedge mowe

• An fab. 2026

Optimal SVX 250 Sweeping Brush Municipal equipment Sweeping equipment

A Lehner Polaro 110 in like-new condition is offered here. Features: - Electric control system - 110L tank - Working width: 0.8–6.0 m - Private sale! - Please f

• An fab. 2021

Greentec Weed Brush BR70 For cleaning pavers, cobblestones, sidewalks, and much more. The brushes are made of steel wire and can easily remove dirt, mud, and weeds.

• An fab. 2022

No. 59407 Snow Blower - with Stiga WS 300 engine, Powered by STIGA - with 302cc displacement - with 230 V electric start - 66 cm working width - 55 cm intake hei

• An fab. 2026

No. 60485 Roller Spreader - 200 Lt. capacity - 100 cm working width - includes power take-off shaft - includes cover tarp The sales team at Schwarzmayr would

• An fab. 2023

Hauer VS-L3000 - Merlo Zm2 mount - Heavy-duty wheels - Marker lights - Position markers - Height and level compensation - Shock valve - Spring-loaded folding segment

• 1 CP/1 kW
• An fab. 2023

Bema 30 Dual Powermaster 2300 mm with - LED lighting system - 400-liter water tank - Water spray system including side brush - Left-side brush with speed control -

• An fab. 2026

No. 75254 Snow Plow - Compatible with TXG, TM, TH, and TG models - With municipal triangle mounting - Working width: 1318–1500 mm - Overload protection via tilt

No. 54498 - NEW MACHINE Turbo IV Weed Brush - with Honda GCV 160 OHC engine - with 6 interchangeable wire braids via quick-change fasteners - with automatic ground

No. 59687 Vibratory Plate: Weight: 125 kg Centrifugal Force: 21 kN Plate Width: 55 cm Plate Length: 61 cm Frequency: 95 Hz Engine: Hatz 1B20 Displacement: 232 cc

• An fab. 2023

Greentec HXF 2802 Multi-Mount (Left) - 2.2 m working width - 2 m transport width - 40 l/min at 180 bar - 150 kg - Mechanical adjustment between transport and