Maşini de întors fânul – Carinthia

• An fab. 2007
• 100 h
• 440 cm

Pöttinger HIT 44N Special, Alpine spreader in the following configuration: - Three-point hitch, Categories 1 and 2 - Mechanical boundary spreading device - Swivel b

• 600 cm

Sip Spider 615 Z Pro, 6-rotor spreader with shock-absorbing struts and Cat. 2 three-point hitch, PTO shaft, feeler wheel, lighting, hydraulic boundary control, worki

• An fab. 2026
• 10 h
• 680 cm

Krone TS 680 side swath mower, 2x 13 tine arms, 8 tine arms foldable, tires: 15.0/55-17, transport width 2.9 m, tandem axle with six-wheel rotor chassis, with front

• An fab. 1994
• 420 cm

Used machine with the following features: * Cat. 1/2 swivel mount * Power take-off shaft with slip clutch * Single-acting hydraulic lift * 4 rotor discs, each with 6

• 400 cm

This rotary hay tedder is in generally good condition and is equipped with a hydraulic lift, swivel arm, feeler wheel, and power take-off shaft. This is a private sa

• 640 cm

Deutz Fahr KH 3.64 Hydro, 6-circuit model with hydraulic folding, swivel mount, roll bar, hydraulic spread control, PTO shaft; needs repair, as described by the cust

• An fab. 2025
• 620 cm

Krone Vendro 620 with 6 rotors, with hydraulic boundary spreading device, hydraulic Folding mechanism, swivel frame with adjustable shock-absorbing struts, internal

• 770 cm

Krone 6 Kreisler KW 7.70/6x7 tines with hydraulic folding, swivel mount with shock absorber struts, spread angle adjustment, drive shaft; in need of repair—available

• An fab. 2006
• 645 cm

Pöttinger Hit 69 NZ-6 rotor harrow with swivel frame and shock-absorbing struts, 6 tines per rotor, balloon tires, hydraulic boundary adjustment, hydraulic folding,

• An fab. 2000
• 500 cm

Kuhn GF 5001 Digidrive rotary rake with 4 rotatable rotors, each with 6 tine arms, swivel mount, hydraulic folding, PTO shaft—as described by the customer, ready for

• An fab. 2026
• 620 cm

Krone 6 Kreisler Vendro 620 Highland lightweight version, specially designed for smaller tractors and mower-tractors, with hydraulic folding, swivel mount, and hydra

• An fab. 2012
• 1100 cm

Krone KWT 11.22 Rotary Hay Tiller with undercarriage, trailed model, 10 rotors with 6 tine arms each, Octolink coupling, hydraulic boundary spreading device, lightin

• An fab. 2001
• 850 cm

Kuhn GF 8501 Digidrive, 8-rotor hay tedder with chassis, 8 rotors with 6 tines each, hydraulically foldable, ideal for smaller tractors, ready for use and operation,

• An fab. 2013
• 460 cm

Krone 4-rotor KW 4.62 with hydraulic folding, 6 tine arms per rotor, swivel bracket and shock absorber struts, rear parking stands, spread angle adjustment, tine los

• An fab. 2009
• 540 cm

Pöttinger Hit 540 N rotary rake with hydraulic folding, 4 rotors, each with 7 tine arms, shock-absorbing struts, protective bars, rotors that can be turned in, PTO s

• An fab. 2026
• 420 cm

Krone Vendro 420 Highland Light Alpine 4-rotor spreader with swivel mount and hydraulic dampers, 5 tines per rotor, 15x6.00-6 balloon tires, mechanical central sprea

• An fab. 2023
• 780 cm

Kuhn GF 7902 Rotary Tedders with 8 rotors, each with 5 tine arms, shock-absorbing struts, feeler wheel, hydraulic boundary spreading device, spreading angle adjust

• 445 cm

Krone KW 4.45/4 rotary tine tedder, in operating condition and with the following specifications: * Working width: 445 cm * Three-point hitch, Categories I & II, *

• 665 cm

Stoll 665 DW 6-Centrifuge with a working width of 6.65 m, 6 centrifuges, each with 6 tines, hydraulic folding, with warning signs, mechanical front support leg, swiv

• An fab. 2015
• 770 cm

Pöttinger 8-Kreisler HIT 8.81, 2016 model, 7.7 m working width, swivel frame, hydraulic boundary control system, balloon tires, warning signs and lights, roll bar, g

• An fab. 2006
• 600 cm

Krone KW 6.02/6, hydraulic folding, 5 tine arms, swivel bracket and shock absorber struts, front and rear parking stands, spread angle adjustment, tine loss protecti

• An fab. 2011
• 580 cm

Kuhn GF 582 Digidrive rotary rake with 6 rotors, each with 5 tine arms, swivel frame with shock-absorbing struts, hydraulic folding, PTO shaft, mechanical boundary

• An fab. 2011
• 455 cm

Sip Spider 455 Pro 4-rotor harvester with swivel mount and shock absorber struts, two rotors that can be rotated in, 6 tines per rotor, balloon tires, hydraulic fold

• An fab. 2003
• 640 cm

Kuhn GF 6401 MH 6-catcher with a working width of 6.40 m, 6 catchers with 6 tines each, hydraulic folding, lighting with warning signs, mechanical front support leg

• An fab. 2026
• 620 cm

Krone 6 Kreisler Vendro 620 Highland lighter version, designed specifically for smaller tractors and mower-tractors, with hydraulic folding, swivel mount, and hydrau

• 540 cm

This is a used machine in working condition and is sold without a warranty. The Pöttinger HIT 54 N is a 4-rotor rotary rake with a working width of approximately 5.4

• An fab. 2006
• 670 cm

Krone 6 Kreisler KW 6.72/6 with hydraulic boundary spreading device, hydraulic folding, swivel mount with shock-absorbing struts, spreading angle adjustment, tine lo

• An fab. 2026
• 1020 cm

Krone Vendro T 1020 trailed rotary tine tedder, with separate transport chassis, 10 rotors with 5 tine arms, 2x DW control units required, Krone OptiTurn tines with

• 900 cm

Krone 8 Kreisler Vendro 900, 3-point hitch with front feeler wheel and hydraulic boundary spreading device, hydraulic Folding mechanism, swivel mount with hydraulic

• An fab. 2026
• 820 cm

Krone 8 Kreisler Vendro 820 Highland lightweight version, hydraulic folding, swivel mount, and hydraulic shock absorber struts, with adjustable lower link pins to ad

• An fab. 2026
• 1020 cm

Krone Vendro Kreiselzettwender gezogen, mit seperaten Transportfahrwerk, 10 Kreisel mit 5 Zinkenarme, 2x DW Steuergeräte erforderlich, Krone OptiTurn Zinken mit 3D-E

• An fab. 2027
• 820 cm

Krone 8 Kreisler Vendro 820 with hydraulic boundary control, hydraulic folding mechanism, swivel frame with mechanical damping struts, parking system, front and rea

• An fab. 2026
• 400 cm

Sip Spider 400/4 Alp Kreiselzettwender - Arbeitsbreite 400cm - Dreipunktanbau Kat I & Kat II - Schwenkbock - Dämpfungsstreben - Gelenkwelle - hydraulisch k

• An fab. 2026
• 620 cm

Krone Vendro 620 Highland Kreiselzettwender - Arbeitsbreite 620cm - Gelenkwelle - hydraulisch klappbar EW - OctoLink Fingerkupplung - 6 Kreisel mit je 5 Dop

• 470 cm

Pöttinger Hit 47 N rotary rake with hydraulic folding, 4 rotors, each with 6 tine arms, shock-absorbing struts, protective bars, rotors that can be turned in, power

• An fab. 2026
• 1014 cm

Krone Vendro 1020 Kreiselzettwender in folgender Ausführung: * 10, 14m Arbeitsbreite * ca. 2, 90m Transportbreite * 10 Kreisel mit je 5 Zinkenarme * erforderlich

• 350 cm

Sip Spider 350/4 Alp Kreiselzettwender - Arbeitsbreite 350cm - Dreipunktanbau Kat I & Kat II - Mechanische klappung - Gelenkwelle - 4 Kreisel mit je 5 Doppelz

• An fab. 2025
• 350 cm

Neumaschine unbenützt in serienmäßiger Ausstattung mit: - starren Anbaubock Kat. 1/2 - Gelenkwelle mit Rutschkupplung - hydraulische Klappung - 4 Kreiselteller m

• An fab. 2025
• 820 cm

Krone Vendro 820 Highland - Dreipunktanbau Kat II - Arbeitsbreite 820cm - hydraulisch klappbar DW - Grenzstreueinrichtung - Abstellfüße - Gelenkwelle - Opt

• 520 cm

EDV: 70483 Kreiselheuer - mit 5, 2m Arbeitsbreite - mit Gelenkwelle - mit Abstellfuß - mit Schutzbügel - mit 4 Kreiseln zu je 6 Zinkenarme - mit mech. Grenzs

• An fab. 2026
• 600 cm

Ideal geeignet auch für kleinere Traktoren oder größere Mähtracs. Neumaschine unbenützt in serienmäßiger Ausstattung mit: * Schwenkbock Kat. 1/2 * Dämpfungsstrebe

• An fab. 2026
• 680 cm

Krone 6 Kreisler Vendro 680 mit hydr. Grenzstreueinrichtung, hydr. Klappung, Schwenkbock mit einstellbaren Dämpferstreben, mit innenliegenden Druckfedern, Abstellkon

• 640 cm

Deutz Fahr KH 3.64 Hydro, 6-Kreisler mit hydraulischer Klappung, Schwenkbock, Schutzbügel, hydraulische Grenzstreueinrichtung, Gelenkwelle, reparaturbedürftig, sofor

• An fab. 2026
• 616 cm

Krone Vendro 620 Highland Leichter Kreiselheuer mit durchdachter Technik in folgender Ausführung: * Dreipunktanbau Kat. 2, Montage sehr nahe am Traktor möglich

• An fab. 2009
• 540 cm

Pöttinger Hit 54N rotary rake with hydraulic folding, 4 rotors, each with 6 tine arms, shock-absorbing struts, protective bars, rotors that can be turned in, PTO sha

• An fab. 2025
• 400 cm

Neumaschine mit folgender Ausstattung: * Schwenkbock Kat. 1/2 * Dämpfungsstreben * Gelenkwelle mit Rutschkupplung * hydr. Aushebung einfachwirkend * 4 Kreiselte

• 450 cm

Sip Spider 455/4 Kreiselzettwender - Arbeitsbreite 450cm - Dreipunktanbau Kat I & Kat II - hydraulisch klappbar - 4 Kreisel mit je 6 Doppelzinken - Tastrad

• An fab. 2023
• 900 cm

Ausstattung: - Beleuchtung - Grenzstreueinrichtung - 8 Kreisel 6 Zinkenarme - 1260kg Eigengewicht - Kompakte Transport- und Lagerabmessungen – die Lagerhöhe l