Piața de mașini

• An fab. 2026

LESNIK SHL S25 Universal Front Hydraulic System for easy self-installation on almost all tractors up to approx. 140 hp. Double-acting lifting cylinder on swivel bear

• An fab. 2026

LESNIK SHL S17 Universal Front Hydraulic System for easy DIY installation on almost all tractors up to approx. 90 hp. Double-acting lifting cylinder on swivel bearin

• An fab. 2026

Hydrac Fronthydraulik F3-US mit Konsole bis Kupplungsgehäuse inkl. Schlauchsatz, passend zu Same Siver 110-130. Das Hubwerk ist neu und war noch nicht montiert. P

• An fab. 2024

Fritz Fronthydraulik Kat. 2 zur Selbstmontage. Cylinder: Double action, Pendular compensation Tractor equipment and accessories Front hydraulics

• An fab. 2026

LESNIK SHL S35 universal front linkage for self-installation for tractors from 140 to 230 HP, Walterscheid lower link catch hook category 3L, lower link width catego

• An fab. 2026

LESNIK SHL S8 Universal Front Hydraulic System with 800 kg lifting capacity for DIY installation without a mounting bracket, for small tractors from 25 to 55 hp, 70

• An fab. 2026

New mounting brackets tailored to your tractor for the LESNIK SHL S8 / S17 / S25 / S35 series universal front hydraulic systems. The mounting brackets are optimally

• An fab. 2024

Available immediately! Lesnik front linkage SHL S17. Features & Details: - Easy self-mounting on almost all tractors up to approx. 80 hp - Double-acting liftin

• An fab. 2024

Sofort Verfügbar! Lesnik Fronthydraulik SHL S25. Ausstattung & Details: - Einfacher Selbst Anbau an fast alle Traktoren bis ca. 130 PS - Hubzylinder doppelwirk

• An fab. 2025

Fronthydraulik Hydrac FHDL 2, 0 US == Lagerware == -Universalanbau -hydraulisch einfachwirkend -Arme hochklappbar -Schnellfanghaken -Absperrhahn zu bes

• An fab. 2026

Front hydraulic system for mounting on a municipal quick-change plate (mounting plate) size 3 or size 3/5 (DIN 76060 Form A, B), suitable for all tractors, trucks, et

• An fab. 2026

Front power lift for hooking into the existing municipal plate (attachment plate) size B3 (also A5-3/5 for an extra charge), suitable for all Unimog, MB Trac and Lin

+++New in the Folger Front Systems range - Made in Bavaria+++ +++ New Holland-Steyr-Case-Ford-Fiatagri-Solis-Valtra-Kubota-Kioti-McCormick-Landini-Deutz-Fahr +++ Exa

• An fab. 2026

New LESNIK SHL F Series front hydraulics – custom-built and permanently mounted. The front linkage is optimally adapted to the specific tractor model and seamlessly

• An fab. 2026

SHL S17 front hydraulics for easy self-mounting on almost all tractors up to approx. 90 hp. Double-acting lifting cylinder on spherical plain bearing, lifting force

• An fab. 2026

NEW Lesnik front-mounted hydraulic system with 2.5 t lifting capacity, featuring Walterscheid Cat. 2 hitch, lower link balls and upper link, 2x quick-connect couplin

• An fab. 2026

Hauer Fronthydraulik FS-4 28 2800 kg Hubkraft, Walterscheid Schnellkuppler KAT 2, Pendelausgleich sperrbar, Hub- und Druckeinrichtung, integriertes Zugmaul, Ob

• An fab. 2025

Front hydraulics Aigner Suitable for Lindner 1450 - 1500 and 1600 Support for the coupling stopcock Catch hook cat. 2 Declaration of Conformity Perfect fit an

• An fab. 2026

Front hydraulics for hanging into the existing municipal plate (mounting plate) size 3 or size 3/5 (DIN 76060 form A, B), suitable for all tractors, trucks etc. with

• An fab. 2026

Front power lift for hanging into the existing communal plate (mounting plate) size 3 (also size 3/5 for an additional charge), suitable for all Unimog, MB Trac and

• An fab. 2026

Front power lift for hanging into the existing communal plate (mounting plate) size 3 (also size 3/5 for an additional charge), suitable for all Unimog, MB Trac and

• An fab. 2026

NEW Lesnik front-mounted hydraulic system with 2.5 t lifting capacity, featuring Walterscheid Cat. 2 hitch, lower link balls and upper link, 2x quick-connect couplin

• An fab. 2025

SHL S17 front hydraulic system for easy DIY installation on almost all tractors up to approx. 90 hp. Double-acting lift cylinder mounted on a swivel bearing, lifting

• An fab. 2021

Zuidberg front linkage with 1.8T lifting power, with top link, Walterscheid hook, cast swing arm, incl. fastening material, hydraulic lines branch and shut-off va

• An fab. 2022

Fronthydraulik SHL S17 -zum einfachen Selbstanbau an fast alle Traktoren bis ca. 75 PS -Hubzylinder doppelwirkend auf Gelenklager -Hubkraft 1700 kg am Fanghaken

• An fab. 2026

NEUE Lesnik Fronthydrauliken mit 1, 7 t Hubkraft - Walterscheid Fanghaken Kat. 2 - Unterlenker-Kugeln und Oberlenker - 2x Schnellkupplungsmuffen mit Staubkappen vo

• An fab. 2026

NEUE Lesnik Fronthydrauliken mit 2, 5 t Hubkraft - Walterscheid Fanghaken Kat. 2 - Unterlenker-Kugeln und Oberlenker - 2x Schnellkupplungsmuffen mit Staubkappen vo

• An fab. 2026

LESNIK Front Hydraulics 3.5-ton Lifting Capacity Standard equipment includes: - Walterscheid hitch hook, Cat. 3L - Lower link balls and upper links - 2 front hydraul

• An fab. 2024
• 1 h

***Lagerware *** sofort verfügbar! Für viele Traktorfabrikate die universelle Fronthydraulik zum Selbstanbau aus dem Hause Zuidberg. folgende Teile sind erhält

• An fab. 2024

NEUE 3, 5to Variante der 1000 fach beährten SHL S-Universal Fronthydraulik zum SELBSTANBAU für Traktore von 120 bis 230 PS, Walterscheid Unterlenkerfanghaken Kat.3L,

• An fab. 2026

NEUE Lesnik Fronthydrauliken mit 2, 5 t Hubkraft, mit Walterscheid Fanghaken Kat. 2, Unterlenker-Kugeln und Oberlenker, 2x Schnellkupplungsmuffen mit Staubkappen vorn

• An fab. 2026

Neue Lesnik Fronthydraulik SHL S17 zum einfachen Selbstanbau an fast alle Traktoren. Hubzylinder doppelwirkend auf Gelenklager, Hubkraft 1700kg am Fanghaken über gan

• An fab. 2026

Fronthydraulik LESNIK SHL S25 zum Selbstaufbau für Traktoren bis ca. 140 PS, doppelwirkende Hubzylinder mit 2500 kg Hubkraft am Fanghaken, Hubarme einklappbar, Pende

• An fab. 2026

Fronthydraulik LESNIK SHL S17 zum Selbstaufbau für Traktoren bis ca. 90 PS, doppelwirkende Hubzylinder mit 1700 kg Hubkraft am Fanghaken, Hubarme einklappbar, Pendel

• An fab. 2026

With mounting bracket, compatible with the following tractor models: - Steyr Kompakt 360 - 370 - 375 - 485 - 495 - 4065 - 4075 - 4085 - 4095, - New Holland TN55D

• An fab. 2022

NEUE Lesnik Fronthydrauliken -2, 5 t Hubkraft -Walterscheid Fanghaken Kat. 2, Unterlenker-Kugeln und Oberlenker -2x Schnellkupplungsmuffen mit Staubkappen vorne

• An fab. 2026

LESNIK SHL S25 Universal Front Hydraulic System with 2.5 metric tons of lifting capacity for easy self-installation on almost all tractors up to approx. 140 PS Stand

• An fab. 2026

LESNIK SHL S17 Universal Front Hydraulic System with 1.7To Lifting Capacity for easy self-installation on almost all tractors up to approx. 90 PS Standard features i

• An fab. 2026

LESNIK Front Hydraulics 800 kg Lifting Capacity for small tractors from 25 to 55 hp - Weight: 70 kg - Walterscheid quick coupler, Cat. 1 - - Lower link spacing: C