Maschinenmarkt Niederlande

• Bj. 2023
• 760 cm

New Fendt Former 801, manufactured in 2023.Year of manufacture: 2023New old machineWorking width: 6.80–7.60 mOptions:Dual wide-angle PTOTandan axle u

• Bj. 2023
• 255 cm

New Fendt Slicer 270P. Built in 2023, working width 2.55 m.New, old machine, still in the crate. Erntetechnik Grünland Mähwerke

• Bj. 2023
• 306 cm

New Fendt Cutter 3140FPV.Year of construction: 2023Factory breed: 3.06 mThis means that the lever can be used with an extra two times as shown. Swath width 0

• Bj. 2024
• 460 cm

Neue Kreiselegge Maschio Gabbiano 4600. Baujahr 2024 und 280 PS. Technische Daten Baujahr 2024 Arbeitsbreite 460 cm 280 PS Hydraulisch klappbar Zentralgetriebe, 1000

• Bj. 2018

Used Fendt Katana 85S4. Built in 2018 and with 1, 937 operating hours.Chassis40 km/h versionRear axle, sprung, reinforcedChopping UnitUniversal Chopping

• Bj. 1993
• 2674 h

Used Massey Ferguson 38RS combine harvester + cutting table, built in 1993. With 2, 674 working hours and a track width of 2, 980 mm. Has had maintenance done.Spec

• Bj. 2025

Used demo machine Fendt Tigo 75XRD, built in 2025.SpecificationsApproved up to 40 km/hBase machine: Tigo 75 XR 44M3 DIN capacityAir brake systemElectro-h

• Bj. 2023

Neuer Fendt Tigo 50MSD mit Produktionsjahr 2023.SpezifikationenZugelassen bis zu 40 km/hDruckluft-BremsanlageTandem für ein zulässiges Gesamtgewicht von 15

• Bj. 2023

Neuer Fendt Tigo 40MSD mit Baujahr 2023. Technische Daten Druckluftbremssystem Tandem für ein zulässiges Gesamtgewicht von 15 Tonnen Spurlenkbare Hinterachse 2 Abwur

• Bj. 2019
• 310 cm

Ex demo machine Fendt Slicer 3160 TLX KC, built in 2019.SpecificationsYear of construction: 2019Working width: 3.10m6 mowing discsTine conditionerEx. D

• Bj. 2023
• 800 cm

Newly built Fendt Former 880 with year of construction 2023.SpecificationsYear of construction 2023Newly built machineWorking width 7.20 – 8.00 meters12

• Bj. 2023
• 660 cm

Used Fendt Twister 6606DN with year of construction 2023 and a working width of 6.6 meters.SpecificationsLightingMechanical tilting for edge shaking (optiona

• Bj. 2022
• 900 cm

Young verwendete einen Vicon Fanex 904 Hydro. Baujahr 2022, mit einer Arbeitsbreite von 9 Metern.Technische Daten Kreiselschwader 9 Meter Arbeitsbreite 8 Kreisel

• Bj. 2024

New Fendt Rotana 130F Combi MY24 with construction year 2024.SpecificationsBasic machine 130 F CombiBaleControl Pro ISObus control + camera displayBale sha

• Bj. 2017

Used Lely Welger RPC160V baler / wrapper combination. With year of construction 2017 and a bale position with 14, 631.SpecificationsYear of construction 2017B

• Bj. 2021
• 1946 h

Used Massey Ferguson 8s.205 Dyna7 Exclusive. Built in 2021 and with 1, 946 operating hours.SpecificationsDyna7 40 km/h transmissionOil pump 150 l/min4x rear

• Bj. 2023
• 2370 h

Used Massey Ferguson 7s.180 Dyna 6 Efficient. With no fewer than 2, 370 operating hours and built in 2023.SpecificationsDyna-6 50 km/h Ecodrive110 l/min oil p

• 50 PS/37 kW
• Bj. 2025

New Massey Ferguson e1700 HC with year of manufacture 2025 and 50 hp.SpecificationsFully electricBenevelli water-cooled electric motor 50 hpBattery capacit

• 50 PS/37 kW
• Bj. 2025

Neuer Massey Ferguson e1700 MP, Baujahr 2025 und 50 PS.SpezifikationenVollständig elektrischWassergekühlter Benevelli-Elektromotor, 50 PSBatteriekapazität:

• 400 PS/294 kW
• Bj. 2020
• 2580 h

Used Valtra S394 tractor. Built in 2020, 400 hp, and 2, 580 hours of operation.Specifications2 DW valves at the front with 2 pairs of quick couplings6 DW valv

• Bj. 2021
• 6641 h

Used Valtra T174 Versu tractor. Built in 2021 and with 6, 641 operating hours.GeneralBlack MetallicValtra Unlimited equipmentSmarttouchTransmissionVer

• Bj. 2021
• 6563 h

Used Valtra T174 Versu tractor. Built in 2021 and with 6, 563 operating hours.GeneralBlack MetallicValtra Unlimited equipmentSmarttouchTransmissionVer

• Bj. 2021
• 6351 h

Used Valtra T174 Versu tractor. Built in 2021 and with 6, 351 operating hours.GeneralBlack MetallicValtra Unlimited equipmentSmarttouchTransmissionVer

• Bj. 2017
• 3160 h

Gebrauchter Valtra N174 Active mit Baujahr 2017 und 3.160 Betriebsstunden.SpezifikationenBaujahr 20173160 BetriebsstundenFrontkraftheber + PTO2 DW-Ventil

• 510 PS/375 kW
• Bj. 2021
• 5250 h

Used Fendt 1050 Gen2 ProfiPlus. The tractor, built in 2021, 510 hp and 5, 250 operating hours.Transmission60 km/hPTO 1000/1000 ELifting deviceFront lift

• Bj. 2016
• 7500 h

Used Fendt 939 S4 ProfiPlus from 2016. With approximately 7, 500 working hours.Specifications50 km/hAir-suspended cab suspensionCool boxFront linkageFro

• 287 PS/211 kW
• Bj. 2022
• 1475 h

Gebrauchter Fendt 828 Vario S4 ProfiPlus. Der Traktor, Baujahr 2022, hat eine Motorleistung von 287 PS und hat 1.475 Betriebsstunden.Getriebe50 km/hZapfwelle

• 265 PS/195 kW
• Bj. 2020
• 4435 h

Used Fendt 826 Vario S4 ProfiPlus tractor. Built in 2020, 265 hp, and 4, 435 hours of operation.SpecificationsFront linkage Cat. 2Rear PTO 540 E & 1000 rpmH

• 246 PS/181 kW
• Bj. 2020
• 1580 h

Lighly used Fendt 724 Vario Gen6 ProfiPlus setting 2. The tractor, built in 2020, has an engine power of 246 hp and has 1.580 operating hours.Transmission40 km

• 206 PS/152 kW
• Bj. 2021
• 1794 h

Used Fendt 720 Vario Gen6 PowerPlus setting 1. Built in 2021, 206 hp and 1, 794 working hours.SpecificationsCat. 2 front linkage, optionally including PTOHydr

• 201 PS/148 kW
• Bj. 2020
• 4510 h

Used Fendt 720 Vario S4 PowerPlus. The tractor, built in 2020, has an engine power of 201 hp and has 4, 510 operating hours.Transmission50 km/h versionPTO spe

• 150 PS/110 kW
• Bj. 2021
• 1070 h

Young used Fendt 514 Vario S4 ProfiPlus. The tractor, built in 2021, has an engine power of 150 hp and has 1.070 operating hours.Transmission50 km/h versionP

• 133 PS/98 kW
• Bj. 2019
• 2970 h

Used Fendt 513 Vario S4 PowerPlus. This tractor, built in 2019, has an engine power of 133 hp and has 2.970 operating hours.Transmission50 km/h versionPTO sp

== Weitere Informationen (CZ) == Teil geeignet für: Verwendungszweck Bauwesen Seriennummer: W52646731 == Weitere Informationen (DE) == Teil geeignet für: Verwendungs

• 11500 h

== Допълнителна информация (BG) == - Приставка за бърза смяна == Více podrobnosti (CZ) == = Další možnosti a příslušenství = - Nástavec pro rychlou výměnu = Další in

• 4688 h

== Více podrobnosti (CZ) ==Materiál aplikace: KukuřicePřídavné zařízení vhodné pro: Zemědělské strojeZáruka: No Warranty== Weitere Informationen (DE) ==

• 4740 h

== Více podrobnosti (CZ) ==Přídavné zařízení vhodné pro: Zemědělské strojeZáruka: No Warranty== Weitere Informationen (DE) ==Einsatz geeignet für: Landm

== Více podrobnosti (CZ) ==Materiál aplikace: KukuřicePřídavné zařízení vhodné pro: Zemědělské strojeZáruka: No Warranty== Weitere Informationen (DE) ==

== Overige details (NL) ==Container flat   • Geschikt voor kettingsysteem ( haak of kabel optie )   • Afmetingen 6500x2400 mm   • Haakhoogte 1450 mm   • Traa

• Bj. 2018

== Overige details (NL) ==prijs: Prijs op aanvraagQuantity: 1Unit: Stukgebruikte schijvenmaaier in nette staat Reparatur und Ersatzteile Zum Ausschlachten

• Bj. 2025

== Overige details (NL) ==prijs: Prijs op aanvraagQuantity: 1John Deere1150KG gewicht blok voor in de fronthefevt optie aan moederblok te monteren adapter be

== Více podrobnosti (CZ) ==Vybavení: Zametací vůzRok výroby: 2025Oblast působnosti: KonstrukceSériové číslo: 257== Weitere Informationen (DE) ==Einric

== Více podrobnosti (CZ) ==Díl vhodný pro: Oblast působnosti konstrukceDPH/marže: Odpočet DPH pro podnikateleSériové číslo: 11164578== Weitere Informatione

== Více podrobnosti (CZ) ==Díl vhodný pro: Oblast působnosti konstrukceDPH/marže: Odpočet DPH pro podnikateleSériové číslo: 200600== Weitere Informationen

== Více podrobnosti (CZ) ==Díl vhodný pro: Oblast působnosti konstrukceDPH/marže: Odpočet DPH pro podnikateleSériové číslo: 090402== Weitere Informationen

== Více podrobnosti (CZ) ==Díl vhodný pro: Oblast působnosti konstrukceDPH/marže: Odpočet DPH pro podnikateleSériové číslo: 4108856A / 68394796== Weitere I

• Bj. 2020

Informationen auf Deutsch:Ducker Schlegelmäher-SetDucker USM 21 HeckschlegelmäherBaujahr: 2020Arbeitsbreite (m): 2, 10Transportbreite (m): 2, 25Leist

• 75 PS/55 kW
• Bj. 2018
• 5171 h

Wacker Neuson ET90 - OilQuickGerman Machine / Tilting BucketYear: 2018Reference number: BM007200Hours: 5.171Type ET90 - OilQuickLocation Veldhoven, Netherland