Oehler TDK 180

1 Oehler OL TDK 180 NHR tandem 3-sided tipper in HARDOX
- 18 t permissible total weight
- permissible total weight 18 t
- Box dimensions inside: 5035x2360 (2300) x 600 mm
- Floor plate: 5 mm Hardox
- Chassis: I profile frame
- Brake: 2-circuit air brake
- Drop sides: Base drop side 600 mm HARDOX 2.5 mm thick
- Axles: FAD: suitable for 25/40 km/h, 406x120x130 mm square
- Electrics: 12 volt lighting system, rear socket
- Paintwork: ACC dip primer and powder coating
-

1 Oehler OL TDK 180 NHR tandem 3-sided tipper in HARDOX - 18 t permissible total weight - permissible total weight 18 t - Box dimensions inside: 5035x2360 (2300) x 600 mm - Floor plate: 5 mm Hardox - Chassis: I profile frame - Brake: 2-circuit air brake - Drop sides: Base drop side 600 mm HARDOX 2.5 mm thick - Axles: FAD: suitable for 25/40 km/h, 406x120x130 mm square - Electrics: 12 volt lighting system, rear socket - Paintwork: ACC dip primer and powder coating - Tipping device: 5-stage lifting cylinder 1,875 mm stroke, hard chrome-plated piston rod, cardanic bearing, automatic lift limiter - Other: Wheel chocks - Parking supports: rear left and right mechanical - Slide-in ramps: 4000 mm version OE cranked - Approval documents for 40 km/h - Low-profile design - Protective grille for lamps (flat) - Ballast flap at rear 600 mm incl. hydr. system - 16 lashing eyes on floor plate - 435/50R19.5 tires - Toolbox set w. retaining bracket - Saddle support winch - Side lighting - Side collision protection

1 Oehler OL TDK 180 NHR tandem 3-sided tipper in HARDOX - 18 t permissible total weight - permissible total weight 18 t - Box dimensions inside: 5035x2360 (2300) x 600 mm - Floor plate: 5 mm Hardox - Chassis: I profile frame - Brake: 2-circuit air brake - Drop sides: Base drop side 600 mm HARDOX 2.5 mm thick - Axles: FAD: suitable for 25/40 km/h, 406x120x130 mm square - Electrics: 12 volt lighting system, rear socket - Paintwork: ACC dip primer and powder coating - Tipping device: 5-stage lifting cylinder 1,875 mm stroke, hard chrome-plated piston rod, cardanic bearing, automatic lift limiter - Other: Wheel chocks - Parking supports: rear left and right mechanical - Slide-in ramps: 4000 mm version OE cranked - Approval documents for 40 km/h - Low-profile design - Protective grille for lamps (flat) - Ballast flap at rear 600 mm incl. hydr. system - 16 lashing eyes on floor plate - 435/50R19.5 tires - Toolbox set w. retaining bracket - Saddle support winch - Side lighting - Side collision protection

Mr.
Peter Eidenhammer

+43 664 *******

Your message to the seller

Send inquiry