New Holland CR 8.90 + 10,7m SW + SWW IntelliSense

Speed: 30 km/h,
Drum / rotor hours: 904,
Engine manufacturer: FPT,
Engine type: Cursor 13,
Width: 349 cm,
Number of engine cylinders: 6,
Autopilot,
Lighting/warning signs,
double blade,
throughput control,
chopper,
horizontal reel adjustment,
two-wheeler,
cab,
performance monitor,
Air suspension seat,
pendulum compensation,
radio,
Left-hand rapeseed knife - hydraulic,
rape cutter right - hydraulic,
reversing device,
rotor,
rotating beacon,
automatic cutterbar guidance (Autocontour...),
height adjustment,
chaff spreader,
loss measurement,
camera / video surveillance,
hectare counter,
drawbar,
tracked / crawler chassis,
GPS system (receiver),
Xenon version working lights,
LED version working lights,
Work lights 6x front,
work lights 6x rear,
Exhaust gas aftertreatment / AdBlue,
Discharge pipe extension,
Electronic threshing unit optimization,
forward motion control,
moisture measurement,
throughput controller,
radial distributor,
SW brake,
electric spreading plate adjustment,
electric sieve adjustment,
variable rotor speed,
sieve box suspension compensation
________
Young used New Holland CR 8.90 including 35ft cutterbar and all-wheel steered trailer

Year of construction 2021
First use 2021

approx. 1400 engine hours
approx. 904 threshing hours
approx. 3230 hectares

Available immediately!

The indicated price includes the current legal VAT.

STANDARD EQUIPMENT

Engine:
. FPT Cursor 13 engine, 6 cylinders
. Stage 5 emission standard
. Turbocharger, intercooler
. Common rail injection
. Rated output 365 kW/496 hp at 2100 rpm .
. Max. Output 400 kW/544 hp at 2000 rpm .
. Fuel tank 1,300 l
. AdBlue tank 160 l
. Electronic control

Traction drive and axles :
. SmartTrax crawler tracks
Planetary axle drives
. Hydrostatic travel drive, 2-speed transmission with electric gear preselection, overload protection, parking brake
. Electrohydraulic differential lock
. 30 km/h at reduced engine speed

Inclined conveyor :
. Automatic ground pressure control and cutting height control of the cutting unit
. Tilt and angle adjustment of the cutting unit
. AutoFloat system

Feed :
. DFR inclined conveyor with mechanical inclination and angle adjustment of the cutting unit
. DFR drive belt for reduced speed
. Twin pitch rotors

Threshing and separation :
. 2 longitudinal rotors, rotating in opposite directions for threshing
and separating
. Rotor length 2.64 m
. Total threshing

Speed: 30 km/h, Drum / rotor hours: 904, Engine manufacturer: FPT, Engine type: Cursor 13, Width: 349 cm, Number of engine cylinders: 6, Autopilot, Lighting/warning signs, double blade, throughput control, chopper, horizontal reel adjustment, two-wheeler, cab, performance monitor, Air suspension seat, pendulum compensation, radio, Left-hand rapeseed knife - hydraulic, rape cutter right - hydraulic, reversing device, rotor, rotating beacon, automatic cutterbar guidance (Autocontour...), height adjustment, chaff spreader, loss measurement, camera / video surveillance, hectare counter, drawbar, tracked / crawler chassis, GPS system (receiver), Xenon version working lights, LED version working lights, Work lights 6x front, work lights 6x rear, Exhaust gas aftertreatment / AdBlue, Discharge pipe extension, Electronic threshing unit optimization, forward motion control, moisture measurement, throughput controller, radial distributor, SW brake, electric spreading plate adjustment, electric sieve adjustment, variable rotor speed, sieve box suspension compensation ________ Young used New Holland CR 8.90 including 35ft cutterbar and all-wheel steered trailer Year of construction 2021 First use 2021 approx. 1400 engine hours approx. 904 threshing hours approx. 3230 hectares Available immediately! The indicated price includes the current legal VAT. STANDARD EQUIPMENT Engine: . FPT Cursor 13 engine, 6 cylinders . Stage 5 emission standard . Turbocharger, intercooler . Common rail injection . Rated output 365 kW/496 hp at 2100 rpm . . Max. Output 400 kW/544 hp at 2000 rpm . . Fuel tank 1,300 l . AdBlue tank 160 l . Electronic control Traction drive and axles : . SmartTrax crawler tracks Planetary axle drives . Hydrostatic travel drive, 2-speed transmission with electric gear preselection, overload protection, parking brake . Electrohydraulic differential lock . 30 km/h at reduced engine speed Inclined conveyor : . Automatic ground pressure control and cutting height control of the cutting unit . Tilt and angle adjustment of the cutting unit . AutoFloat system Feed : . DFR inclined conveyor with mechanical inclination and angle adjustment of the cutting unit . DFR drive belt for reduced speed . Twin pitch rotors Threshing and separation : . 2 longitudinal rotors, rotating in opposite directions for threshing and separating . Rotor length 2.64 m . Total threshing and separating area 3.06 m² Cleaning : . OptiClean cleaning system . Electrically adjustable lamella screens, total screen area 6.50 m² . Two separate final threshers, electr. monitoring . Automatic slope compensation up to 17% of preparation floor, cleaning fan and sieve box Grain elevator and grain tank : . Grain tank volume 14,500 l . Discharge rate 142 l/s Straw and chaff distribution : . 6-row straw chopper and hydr. driven chaff spreader chaff spreader, tool-free change from straw placement to chopping mode . active straw distribution OptiSpread Plus Driver's seat : . Deluxe air suspension seat . Automatic climate control . Bluetooth radio . Refrigerator with adjustable temperature . Automatic fruit setting (ACS) . Freely adjustable, color IntelliView IV touch screen monitor . 24 l hand wash tank under the access ladder . Rear view camera SPECIAL EQUIPMENT: COMFORT PACKAGE . Air compressor . Hose and compressed air gun . Sunrollo package . LED lighting package VEHICLE . Drive axle with differential lock AUTOMATIC COMBINE HARVESTER ADJUSTMENT INTELLISENSE . Grain elevator with GrainCam preparation . Automatic throughput control IntelliCruise . Moisture and yield measurement . automatic combine harvester adjustment IntelliSense . electrically adjustable pre-sieve from the cab . electrically adjustable rotor cover PRECISION FARMING . NavController bracket . GPS mounting kit OTHER . controllable outlet pipe end piece . Engine blow-off kit . Automatic steering preparation New Holland Varifeed 10.70 m cutterbar Demonstration cutterbar - approx. 100ha run short stalk dividers plugged Ear lifter rapeseed equipment cpl. for SW Heavy Duty TAM cutterbar wagon Leguan Quattro 35 FT - 25 km/h - transport box - all-wheel steered - Overrun brake Optionally, a MacDon FD 235, which was used as a demonstration machine, could also be purchased! Contact person Philipp Herold The information in the description and the pictures are without guarantee and no liability is assumed for typing and transmission errors. Viewing is possible by telephone arrangement. Errors, changes and prior sale reserved.

Speed: 30 km/h, Drum / rotor hours: 904, Engine manufacturer: FPT, Engine type: Cursor 13, Width: 349 cm, Number of engine cylinders: 6, Autopilot, Lighting/warning signs, double blade, throughput control, chopper, horizontal reel adjustment, two-wheeler, cab, performance monitor, Air suspension seat, pendulum compensation, radio, Left-hand rapeseed knife - hydraulic, rape cutter right - hydraulic, reversing device, rotor, rotating beacon, automatic cutterbar guidance (Autocontour...), height adjustment, chaff spreader, loss measurement, camera / video surveillance, hectare counter, drawbar, tracked / crawler chassis, GPS system (receiver), Xenon version working lights, LED version working lights, Work lights 6x front, work lights 6x rear, Exhaust gas aftertreatment / AdBlue, Discharge pipe extension, Electronic threshing unit optimization, forward motion control, moisture measurement, throughput controller, radial distributor, SW brake, electric spreading plate adjustment, electric sieve adjustment, variable rotor speed, sieve box suspension compensation ________ Young used New Holland CR 8.90 including 35ft cutterbar and all-wheel steered trailer Year of construction 2021 First use 2021 approx. 1400 engine hours approx. 904 threshing hours approx. 3230 hectares Available immediately! The indicated price includes the current legal VAT. STANDARD EQUIPMENT Engine: . FPT Cursor 13 engine, 6 cylinders . Stage 5 emission standard . Turbocharger, intercooler . Common rail injection . Rated output 365 kW/496 hp at 2100 rpm . . Max. Output 400 kW/544 hp at 2000 rpm . . Fuel tank 1,300 l . AdBlue tank 160 l . Electronic control Traction drive and axles : . SmartTrax crawler tracks Planetary axle drives . Hydrostatic travel drive, 2-speed transmission with electric gear preselection, overload protection, parking brake . Electrohydraulic differential lock . 30 km/h at reduced engine speed Inclined conveyor : . Automatic ground pressure control and cutting height control of the cutting unit . Tilt and angle adjustment of the cutting unit . AutoFloat system Feed : . DFR inclined conveyor with mechanical inclination and angle adjustment of the cutting unit . DFR drive belt for reduced speed . Twin pitch rotors Threshing and separation : . 2 longitudinal rotors, rotating in opposite directions for threshing and separating . Rotor length 2.64 m . Total threshing and separating area 3.06 m² Cleaning : . OptiClean cleaning system . Electrically adjustable lamella screens, total screen area 6.50 m² . Two separate final threshers, electr. monitoring . Automatic slope compensation up to 17% of preparation floor, cleaning fan and sieve box Grain elevator and grain tank : . Grain tank volume 14,500 l . Discharge rate 142 l/s Straw and chaff distribution : . 6-row straw chopper and hydr. driven chaff spreader chaff spreader, tool-free change from straw placement to chopping mode . active straw distribution OptiSpread Plus Driver's seat : . Deluxe air suspension seat . Automatic climate control . Bluetooth radio . Refrigerator with adjustable temperature . Automatic fruit setting (ACS) . Freely adjustable, color IntelliView IV touch screen monitor . 24 l hand wash tank under the access ladder . Rear view camera SPECIAL EQUIPMENT: COMFORT PACKAGE . Air compressor . Hose and compressed air gun . Sunrollo package . LED lighting package VEHICLE . Drive axle with differential lock AUTOMATIC COMBINE HARVESTER ADJUSTMENT INTELLISENSE . Grain elevator with GrainCam preparation . Automatic throughput control IntelliCruise . Moisture and yield measurement . automatic combine harvester adjustment IntelliSense . electrically adjustable pre-sieve from the cab . electrically adjustable rotor cover PRECISION FARMING . NavController bracket . GPS mounting kit OTHER . controllable outlet pipe end piece . Engine blow-off kit . Automatic steering preparation New Holland Varifeed 10.70 m cutterbar Demonstration cutterbar - approx. 100ha run short stalk dividers plugged Ear lifter rapeseed equipment cpl. for SW Heavy Duty TAM cutterbar wagon Leguan Quattro 35 FT - 25 km/h - transport box - all-wheel steered - Overrun brake Optionally, a MacDon FD 235, which was used as a demonstration machine, could also be purchased! Contact person Philipp Herold The information in the description and the pictures are without guarantee and no liability is assumed for typing and transmission errors. Viewing is possible by telephone arrangement. Errors, changes and prior sale reserved.