Iseki TM 3217 AL

No. 66216
Base machine ISEKI TM 3217 AL
Engine:
The ISEKI TM 3217 AL is equipped with an ISEKI-developed engine with an output of 20 hp and a displacement of 1,123 cc.
This engine is water-cooled and meets the emission limits of the EU Stage V directive.
Transmission:
The ISEKI TM 3217 AL offers three reduction gear ranges. Combined
with a synchronized manual transmission, this model
reaches a top speed of up to 25 km/h
(depending on tires).
It is operated via an accelerator pedal in the right footwell,
a range and gear shift lever on the left
fender, and a mechanical reverse gear lever on the left
steering column.
Hydraulics:
The ISEKI TM 3217 AL ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled by a single lever located in the right fender.
The cab models do not have auxiliary hydraulics as standard.
The machine is also equipped with a hydraulic rear power lift, which is also controlled by a lever on the right fender.
PTO:
This machine offers a speed of 540 rpm on the rear PTO. The PTO is mechanically preselected and engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged.
Equipment:
The machine is equipped as standard for operation within the German Road Traffic Licensing Regulations (StVZO). A height-adjustable open-end

Ms.
Sabrina Kaiser

+43 676 *********

Your message to the seller

Send inquiry