Palms Proportional Set Walvoil DPX 50 + Scanreco G2B

Hydraulic Valve Walvoil DPX 050 12/24V with 4 Proportional Sections, Open Center. The valve includes a post-compensation section.

Scanreco G2B Mini 4 pads 12/24V.

This kit is configured for the most popular machine settings, supporting up to 4 standard crane functions. If you require a different dedicated configuration, we can customize it to meet your needs, including variations in spools, voltage, the number of sections, anti-shock valves, connectors, etc.

The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration.

We provide technical support and are readily available via email, whatsup and telephone.

Feel free to contact us at - or - for any inquiries or assistance.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.

--------------------------------------------------------------------------------------------------------------------------------------------------------------

Hydraulic, sectional valve Walvoil DPX 050 with compensation, full proportional



Technical specifications of default configuration:



Inlet section: 32GPM 120l/min - Pmax 300 bar 4351psi Power supply port: 1/2" BPS, tank return port: 1/2" BPS



1st Slewing - Horizontal movement of the crane 50 L/min 13GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors

2nd Main lift 50 L/min 13GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors

3rd Jib - Horizontal bean extending from the crane 50 L/min 13GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors

4th Rotator 50 L/min 13GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors



Outlet section: with the possibility of combining valves, with bleed valve (LS relief), with pressure reducing valve. Control connection "V" and drainage connection "L" closed. Side connections "T1", "P1", "LS1" closed. DBV fixed and sealed to 175 bar at 90L/min.

--------------------------------------------------------

Scanreco G2B Mini with 4 levers



- 1-4 linear levers

- Stop function according to EN ISO 13849-1 Cat. 3, PL e

- Various toggle switches, buttons and rotary switches

- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)

- Operating range > 100 m / > ~330 ft.

- Degree of protection: IP65

- Operating temperature: -20°C to +70°C / ~-4°F to +160°F

- Cable control: standard length 10 meters / ~33 ft.

- G2B Receiver PWM 12 or 24 VDC power supply

- Choice of radio or cable control

- 8 bi-directional proportional outputs

- All analog outputs are programmable for final setting of speeds

- - 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)

- A DV output to control the dump valve

- Radio communication in the ISM band using frequency hopping technology

- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).

- Programmable logic with block, soak, decelerate, ramp functions and much more

- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.

- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)

The kit works with cranes from Palfinger, Hiab, Palms, Kesla, Fassi, Liebherr etc.

A leírás lefordítása