Öhler OL TDK 180 NHR

#ÖHLER OL TDK 180 NHR HIGH-SPEED #
-Perm. total weight: 18 t
-Internal box dimensions: 5035x2360 (2340) x600 mm
-Basic tires: 435/50 19.5 22PR with tire pressure control
-Own weight approx.: approx. 4,500 kg
-Total length: 6,980 mm
-Total width: 2,550 mm
-Dropside height: 600 mm
-Platform height approx.: 1,135 mm
-Track width approx.: 2,050 mm
-axle load capacity: 27,000 kg
-tipping cylinder stages: 5
-Cylinder stroke length: 1,875 mm
-Cylinder stages Ø mm: 75-90-105-120-140
-max. Lifting capacity: 27.7 t
-max. Operating pressure: 180 bar
-req. oil quantity: 18.6 l
-base plate: 5 mm Hardox
-Chassis: I profile frame
-Brake: 2-circuit air brake system
-Drop sides: Base drop side 600mm HARDOX 2.5mm thick,
-axles: BPW, 80 km/h

#ÖHLER OL TDK 180 NHR HIGH-SPEED # -Perm. total weight: 18 t -Internal box dimensions: 5035x2360 (2340) x600 mm -Basic tires: 435/50 19.5 22PR with tire pressure control -Own weight approx.: approx. 4,500 kg -Total length: 6,980 mm -Total width: 2,550 mm -Dropside height: 600 mm -Platform height approx.: 1,135 mm -Track width approx.: 2,050 mm -axle load capacity: 27,000 kg -tipping cylinder stages: 5 -Cylinder stroke length: 1,875 mm -Cylinder stages Ø mm: 75-90-105-120-140 -max. Lifting capacity: 27.7 t -max. Operating pressure: 180 bar -req. oil quantity: 18.6 l -base plate: 5 mm Hardox -Chassis: I profile frame -Brake: 2-circuit air brake system -Drop sides: Base drop side 600mm HARDOX 2.5mm thick, -axles: BPW, 80 km/h suitable, 360x120, 120mm square -support: support leg -Electrics: 12 volt lighting system, rear socket -Paint: ACC dip primer and powder coating Tilting device: 5-stage lifting cylinder, 1,875 mm stroke, hard-chrome plated -piston rod, cardanic bearing, -automatic lift limiter -Miscellaneous: wheel chocks, aluminum ladder -8 lashing eyes on base plate, 4 per side Low-profile design -Hydraulic ballast flap -Saddle support winch -Lamp guard for lighting -Mudguards (required for approval from 40 km/h) -Tool box -Dropside lifting springs left and right -AGS (automatic slack adjuster) ALB (automatic load-dependent brake force regulator) -Parking supports left + right -TDK 180 NHR underride guard -Side underride guard -Side marker lights - yellow #LOCATION OF THE MACHINE: BURGKIRCHEN OÖ# #SUBJECT TO PRIOR SALE #ALL SPECIFICATIONS WITHOUT GUARANTEE#

#ÖHLER OL TDK 180 NHR HIGH-SPEED # -Perm. total weight: 18 t -Internal box dimensions: 5035x2360 (2340) x600 mm -Basic tires: 435/50 19.5 22PR with tire pressure control -Own weight approx.: approx. 4,500 kg -Total length: 6,980 mm -Total width: 2,550 mm -Dropside height: 600 mm -Platform height approx.: 1,135 mm -Track width approx.: 2,050 mm -axle load capacity: 27,000 kg -tipping cylinder stages: 5 -Cylinder stroke length: 1,875 mm -Cylinder stages Ø mm: 75-90-105-120-140 -max. Lifting capacity: 27.7 t -max. Operating pressure: 180 bar -req. oil quantity: 18.6 l -base plate: 5 mm Hardox -Chassis: I profile frame -Brake: 2-circuit air brake system -Drop sides: Base drop side 600mm HARDOX 2.5mm thick, -axles: BPW, 80 km/h suitable, 360x120, 120mm square -support: support leg -Electrics: 12 volt lighting system, rear socket -Paint: ACC dip primer and powder coating Tilting device: 5-stage lifting cylinder, 1,875 mm stroke, hard-chrome plated -piston rod, cardanic bearing, -automatic lift limiter -Miscellaneous: wheel chocks, aluminum ladder -8 lashing eyes on base plate, 4 per side Low-profile design -Hydraulic ballast flap -Saddle support winch -Lamp guard for lighting -Mudguards (required for approval from 40 km/h) -Tool box -Dropside lifting springs left and right -AGS (automatic slack adjuster) ALB (automatic load-dependent brake force regulator) -Parking supports left + right -TDK 180 NHR underride guard -Side underride guard -Side marker lights - yellow #LOCATION OF THE MACHINE: BURGKIRCHEN OÖ# #SUBJECT TO PRIOR SALE #ALL SPECIFICATIONS WITHOUT GUARANTEE#

Mr.
Anton Ottinger

+43 664 *******

Your message to the seller

Send inquiry