Used machines ...
Iseki TM 3267 AL Eco
EUR
14.900
incl. VAT 20%
(12.416,67 excl. VAT 20%)
Engine:
The ISEKI TM 3267 AL is powered by an ISEKI-developed engine with an output of 26 hp and a displacement of 1,123 cc.
This engine is water-cooled and meets the emission limits of the EU Stage V directive.
Transmission:
The ISEKI TM 3267 AL offers three reduction gear ranges. Combined
with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires).
It is operated via an accelerator pedal in the right footwell,
a range and gear shift lever on the left
fender, and a mechanical reverse lever on the left side of the steering column.
Hydraulics:
The ISEKI TM 3267 AL ECO ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled via a single lever mounted on the right fender.
The machine is also equipped with a hydraulic rear power lift, which is also controlled via a lever on the right fender.
The model offers 540 rpm on the rear PTO. The PTOs are mechanically preselected and mechanically engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged.
Equipment:
The machine is equipped as standard for operation in areas subject to German road traffic regulations (StVZO). A 7-pin trailer socket is included as standard.
Additional equipment:
- Front wheels 6.00-12
- Rear wheels 9.50-16
The ISEKI TM 3267 AL is powered by an ISEKI-developed engine with an output of 26 hp and a displacement of 1,123 cc.
This engine is water-cooled and meets the emission limits of the EU Stage V directive.
Transmission:
The ISEKI TM 3267 AL offers three reduction gear ranges. Combined
with a synchronized manual transmission, this model reaches a top speed of up to 25 km/h (depending on tires).
It is operated via an accelerator pedal in the right footwell,
a range and gear shift lever on the left
fender, and a mechanical reverse lever on the left side of the steering column.
Hydraulics:
The ISEKI TM 3267 AL ECO ironer is equipped as standard with a double-acting hydraulic control valve with a floating position. These are controlled via a single lever mounted on the right fender.
The machine is also equipped with a hydraulic rear power lift, which is also controlled via a lever on the right fender.
The model offers 540 rpm on the rear PTO. The PTOs are mechanically preselected and mechanically engaged via the drive clutch, thus interrupting PTO operation when the clutch is engaged.
Equipment:
The machine is equipped as standard for operation in areas subject to German road traffic regulations (StVZO). A 7-pin trailer socket is included as standard.
Additional equipment:
- Front wheels 6.00-12
- Rear wheels 9.50-16
Motor:
In dem ISEKI TM 3267 AL ist ein ISEKI eigener Motor mit einer
Leistung von 26 PS und einem Hubraum von 1.123 cm³ verbaut.
Dieser Motor ist wassergekühlt und unterschreiten die
Abgasgrenzwerte gemäß EU-Richtlinienvorschlages Stage V.
Getriebe:
Der ISEKI TM 3267 AL bietet drei Vorgelegegruppen. Kombiniert
mit einem synchronisierten Schaltgetriebe erreicht dieses Modell
eine Höchstgeschwindigkeit von bis zu 25km/h
(bereifungsabhängig).
Die Bedienung erfolgt über ein Gaspedal im rechten Fußraum,
einen Gruppen- und Gangschalthebel am linken
Kotflügel und einem mechanischen Wendeschalthebel links am
Lenkstock.
Hydraulik:
Der ISEKI TM 3267 AL ECO Bügelmaschine ist serienmäßig mit
einem doppeltwirkenden Hydrauliksteuerventil mit
Schwimmstellung ausgestattet. Diese werden über einem, im
rechten Kotflügel angebrachte, Einzelhebel gesteuert.
Des weiteren ist die Maschine mit einem hydraulischen
Heckkraftheber ausgestattet, welcher ebenfalls über einen Hebel
am rechten Kotflügel angesteuert wird.
An der Heckzapfwelle bietet das Modell 540 U/min. Die
Zapfwellen werden mechanisch vorgewählt und mechanisch
über die Fahrkupplung zugeschaltet, somit wird der
Zapfwellenbetrieb beim Kuppeln unterbrochen.
Ausstattung:
Die Maschine ist serienmäßig für den Betrieb im Bereich der
StVZO ausgerüstet eine 7-polige Anhängersteckdose sind Teil
des serienmäßigen Lieferumfangs.
Zusatzausrüstung:
- AS- Räder, vorn 6.00 - 12
- AS- Räder, hinten 9.50 - 16
Show original
The used small tractor/ special tractor Iseki TM 3267 AL Eco (new if there is the mark “N” or “New machine”) is for sale at Landwirt.com!
This small tractor/ special tractor has the power of 25 hp (19 kW) HP (Horse Power).
It has the construction year of 2024.
The used small tractor/ special tractor Iseki TM 3267 AL Eco is for sale at the price of 14.900 EUR incl. VAT 20% (if abroad: plus transport, forwarding and customs fees).
This small tractor/ special tractor Iseki TM 3267 AL Eco has following equipment: Drive All-wheel drive, Platform Without cabin, Top speed in km/h 25 km/h
Used machine
Type:
TM 3267 AL Eco
hp:
25 hp / 19 kW
Year of construction:
2024
PDF specifications
Add to favourits
Drive: All-wheel drive
Platform: Without cabin
Top speed in km/h: 25 km/h
Stefan Huetter
Show telephone number
Show telephone number
Address verified
Phone verified
Very good data quality
Phone verified
Very good data quality
MEMBER SINCE 2002
Overall rating
Landtechnik Hütter GmbH & Co KG
Burgfried 210
8342 - Gnas
8342 - Gnas
Landwirt.com Auszeichnung



Dealer news
Reviews of the dealer
Overall rating:
01.05.2025
17.04.2023
28.08.2022
19.12.2021
Rate dealer

More offers from this dealer
All ads of this dealer