Used machines ...
Förderschnecke T – 403 PP Ø 150mm
EUR
3.888
incl. VAT 20%
(3.240 excl. VAT 20%)
VERTICAL AND HORIZONTAL SCREW CONVEYOR UNIT T – 403 PP Ø 150 mm CAPACITY 15 - 22 t/h
The vertical screw conveyor can transport material from 4.2 to 15.2 m depending on the motor power; the horizontal feed screw can be extended by 1 meter upon request. This unit is ideal for loading large grain and feed silos, even when cleaning operations require speed. It can also be used for transporting concentrated feed, including granulated feed, as properly selected screw strokes and profiles prevent damage to the granules. This unique design, combined with a small pipe cross-section (Ø 150 mm), achieves high efficiency from 16 to 26 t/h. The motor power depends on the height of the unit and is selected so that the vertical conveyor has the same capacity at each level. The conveyor has a single discharge as standard. However, it can be equipped with a 2-, 3-, and 5-way distributor, allowing the feeding of multiple silos.
Standard equipment includes:
Feed hopper with a capacity of approximately 70 l and dimensions: 0.8 x 0.8 x 0.9 m;
The height of the upper trough edge is 0.9 m, which makes unloading through the trailer's inspection hatch very easy.
In many cases, customers lower the height of the hopper conveyor to ground level to facilitate unloading.
Optional equipment:
Circular outlet for connecting downpipes or distributors.
Galvanized version surcharge of 15%.
Other basket capacities available upon request, with a height limit of 0.8 m.
Two-way distributors, triple distributors, quintuple distributors, downpipes,
bends. 15°, 30°, 45°,
Clamps and pipes
Price example in the ad. Vertical-horizontal auger, 6.2 meters high, power: 3.0 kW + 2.2 kW - 1 meter feeder!
The vertical screw conveyor can transport material from 4.2 to 15.2 m depending on the motor power; the horizontal feed screw can be extended by 1 meter upon request. This unit is ideal for loading large grain and feed silos, even when cleaning operations require speed. It can also be used for transporting concentrated feed, including granulated feed, as properly selected screw strokes and profiles prevent damage to the granules. This unique design, combined with a small pipe cross-section (Ø 150 mm), achieves high efficiency from 16 to 26 t/h. The motor power depends on the height of the unit and is selected so that the vertical conveyor has the same capacity at each level. The conveyor has a single discharge as standard. However, it can be equipped with a 2-, 3-, and 5-way distributor, allowing the feeding of multiple silos.
Standard equipment includes:
Feed hopper with a capacity of approximately 70 l and dimensions: 0.8 x 0.8 x 0.9 m;
The height of the upper trough edge is 0.9 m, which makes unloading through the trailer's inspection hatch very easy.
In many cases, customers lower the height of the hopper conveyor to ground level to facilitate unloading.
Optional equipment:
Circular outlet for connecting downpipes or distributors.
Galvanized version surcharge of 15%.
Other basket capacities available upon request, with a height limit of 0.8 m.
Two-way distributors, triple distributors, quintuple distributors, downpipes,
bends. 15°, 30°, 45°,
Clamps and pipes
Price example in the ad. Vertical-horizontal auger, 6.2 meters high, power: 3.0 kW + 2.2 kW - 1 meter feeder!
VERTIKALE UND HORIZONTALE Schneckenfördereinheit T – 403 PP Ø 150mm KAPAZITÄT 15 - 22 t / h
Die Vertikalschnecke kann je nach Motorleistung von 4,2 bis 15,2 m hoch transportieren, die Horizontale Zubringerschnecke 1. Meter kann auf Anfrage verlängert werden. Das Gerät eignet sich perfekt zum Beladen von großen Getreide- und Futtersilos, Reinigungen auch bei denen es auf Geschwindigkeit ankommt. Sie kann auch für den Transport von Kraftfutter einschließlich Granulatfutter verwendet werden, da richtig gewählte Schneckenhübe und ihre Profilierung das Granulat nicht beschädigen. Dieses einzigartige Design, kombiniert mit einem kleinen Rohrquerschnitt (Ø 150 mm), zeigt eine hohe Effizienz von 16 bis 26 T / h. Die Motorleistung ist abhängig von der Höhe des Gerätes und wird so gewählt, dass der Senkrechtförderer auf jeder Ebene die gleiche Kapazität hat. Standardmäßig hat der Förderer einen Einzelaustrag. Er kann jedoch mit einem 2-, 3- und 5-fach-Verteiler ausgestattet werden, was die Beschickung mehrerer Silos ermöglicht.
Zur Standardausrüstung gehören :
Aufgabetrichter mit einem Fassungsvermögen von ca. 70 l und Abmessungen: 0,8 x 0,8 x 0,9 m;
Die Höhe der oberen Muldenkante beträgt 0,9 m, was das Entladen durch die Revisionsöffnung des Anhängers sehr einfach macht
In vielen Fällen senken Kunden die Höhe des Trichterförderers auf Bodenniveau ab, um das Entladen zu erleichtern.
Zusatzausstattung :
Kreisförmiger Auslauf zum Anschluss von Fallrohren oder Verteilern.
Verzinkte Ausführung Aufpreis von 15%,
Andere Korbkapazitäten auf Anfrage erhältlich, mit einer Begrenzung der Höhe auf 0,8 m,
Zweiwegeverteiler, Dreifachverteiler, Fünffachverteiler, Fallrohre,
Bögen . 15°, 30°, 45°,
Klemmen und Rohre
Preisbeispiel in der Anzeige. Vertikal-Horizontalschnecke 6.2 Meter Höhe Leistung, 3,0 kW + 2,2 kW- 1. Meter Zubringer!
Show original
New machine
Type:
Förderschnecke T – 403 PP Ø 150mm
hp:
7 hp / 6 kW
Year of construction:
2022
PDF specifications
Add to favourits
Christian Kernecker
Show telephone number
Show telephone number
Agrar Kerne
Freudenthal, 7
4240 - Waldburg
4240 - Waldburg
More offers from this category