SIP Spider 350-4 ALP
EUR
5.299
incl. VAT 20%
(4.415,83 excl. VAT 20%)
SIP rotary tedder Spider 350/4-ALP with rigid headstock Cat.I and II with movable balloon tires 15x6.00 - 6,
4-rotor with 5 tine arms each, only 270kg own weight, incl. PTO shaft with overload protection,
Rotor diameter 1.30m, transport width only 2.20m.
The SPIDER 350I4 ALP rotary tedders are designed to work with lower power tractors on steep terrain and slopes.
The tedders are robust and their lightweight construction ensures exceptional manoeuvrability. They are intended for small and medium-sized farms, as well as for spreading or turning fodder in mountain areas.
The spring tine holders are made of HARDOX flat steel and enable optimal distribution and turning of the forage. The different lengths of the spring tines prevent damage to the turf and ensure clean forage.
The scattering angle can be adjusted in the range of 12° to 18° depending on the amount of feed.
4-rotor with 5 tine arms each, only 270kg own weight, incl. PTO shaft with overload protection,
Rotor diameter 1.30m, transport width only 2.20m.
The SPIDER 350I4 ALP rotary tedders are designed to work with lower power tractors on steep terrain and slopes.
The tedders are robust and their lightweight construction ensures exceptional manoeuvrability. They are intended for small and medium-sized farms, as well as for spreading or turning fodder in mountain areas.
The spring tine holders are made of HARDOX flat steel and enable optimal distribution and turning of the forage. The different lengths of the spring tines prevent damage to the turf and ensure clean forage.
The scattering angle can be adjusted in the range of 12° to 18° depending on the amount of feed.
SIP-Kreiselheuer Spider 350/4-ALP mit starrem Anbaubock Kat.I u.II mit beweglichen Ballonbereifung 15x6.00 - 6,
4-Kreisler mit je 5 Zinkenarmen, nur 270kg Eigengewicht, inkl. Gelenkwelle mit Überlastsicherung,
Kreiseldurchmesser 1,30m, Transportbreite nur 2,20m.
Die Kreiselzettwender SPIDER 350I4 ALP sind für die Arbeit mit Traktoren mit geringerer Leistung in steilem Gelände und an Hängen konzipiert.
Die Zettwender sind robust und ihre leichte Bauweise sorgt für eine außergewöhnliche Manövrierfähigkeit. Sie sind für kleine und mittlere landwirtschaftliche Betriebe sowie für das Streuen oder Wenden von Futter in den Berggebieten bestimmt.
Die Federzinkenhalter sind aus HARDOX-Flachstahl gefertigt und ermöglichen ein optimales Verteilen und Wenden des Futters. Die unterschiedlichen Längen der Federzinken verhindern Beschädigungen der Grasnarbe und sorgen für sauberes Futter.
Der Streuwinkel kann je nach Futtermenge im Bereich von 12 ° bis 18 ° eingestellt werden.
Show original
Used machine
Type:
Spider 350-4 ALP
Working width:
340 cm
Working hours:
1 h
Year of construction:
2022
Condition state:
Very good (condition state 1)
Hectares (ha)
1
PDF specifications
Add to favourits
Franz Binder
Show telephone number
Show telephone number
Address verified
Phone verified
Very good data quality
Phone verified
Very good data quality
MEMBER SINCE 2002
Overall rating
BINDER Franz GmbH & CoKG
Lehsdorf 2
3654 - Raxendorf
3654 - Raxendorf
Landwirt.com Auszeichnung
Dealer news
Reviews of the dealer
Overall rating:
31.10.2023
30.08.2023
29.04.2023
20.03.2023
Rate dealer
More offers from this dealer
All ads of this dealer