BB Umwelttechnik Seco Duplex Standart 335 Heck
Available in the following equipment:
■ 3-point attachment CAT 2
■ All parts powder-coated or galvanized
■ Bidux cutting mechanism with Carbodux knife blades and unequal blade pitch
■ Defined cutterbar lift with two hydraulic cylinders
■ Intelligent and adjustable hydraulic collision protection
■ Parking supports
■ Adjustable pressure relief valve (protects the cutting unit in the event of overload)
■ Can be upgraded to a rear butterfly at any time!
■ The position of the cutterbar can be adjusted mechanically, e.g. for operation
with dual tires or adjustment of the overlap to the front mower
■ With skids (cutting heights freely selectable from 4-20 cm)
With cutting unit 3.35 m: with bar reinforcement!
■ For drives with their own oil supply: drive via rear PTO
540 rpm (direction of PTO shaft rotation: clockwise as seen in the direction of travel);
Operating speed of the PTO shaft when mowing: approx. 320 rpm
including own oil supply & additional pump (prepared for butterfly)
in
■ 3-point attachment CAT 2
■ All parts powder-coated or galvanized
■ Bidux cutting mechanism with Carbodux knife blades and unequal blade pitch
■ Defined cutterbar lift with two hydraulic cylinders
■ Intelligent and adjustable hydraulic collision protection
■ Parking supports
■ Adjustable pressure relief valve (protects the cutting unit in the event of overload)
■ Can be upgraded to a rear butterfly at any time!
■ The position of the cutterbar can be adjusted mechanically, e.g. for operation
with dual tires or adjustment of the overlap to the front mower
■ With skids (cutting heights freely selectable from 4-20 cm)
With cutting unit 3.35 m: with bar reinforcement!
■ For drives with their own oil supply: drive via rear PTO
540 rpm (direction of PTO shaft rotation: clockwise as seen in the direction of travel);
Operating speed of the PTO shaft when mowing: approx. 320 rpm
including own oil supply & additional pump (prepared for butterfly)
in
LIeferbar in folgender Austattung:
■ 3-Punkt-Aufnahme KAT 2
■ Alle Teile pulverbeschichtet oder galvanisch verzinkt
■ Bidux Schneidwerk mit Carbodux Messerklingen und ungleicher Klingenteilung
■ Definierte Schneidwerksaushebung mit zwei Hydraulikzylindern
■ Intelligente und einstellbare hydraulische Anfahrsicherung
■ Abstellstützen
■ Einstellbares Druckbegrenzungsventil (schützt das Schneidwerk bei Überlast)
■ Jederzeit aufrüstbar zum Heckschmetterling!
■ Position des Schneidwerks mechanisch verstellbar, z.B. für den Betrieb
mit Zwillingsbereifung oder Einstellung des Überschnitts zum Frontmähwerk
■ Mit Gleitkufen (Schnitthöhen von 4-20 cm frei wählbar)
Bei Schneidwerk 3,35 m: mit Balkenverstärkung!
■ Bei Antrieb mit eigener Ölversorgung: Antrieb über Heckzapfwelle
540 U/min (Drehrichtung Zapfwelle: in Fahrtrichtung gesehen im Uhrzeigersinn);
Betriebsdrehzahl der Zapfwelle beim Mähen: ca. 320 U/min
inkl. Eigenölversorgung & Zusatzpumpe ( vorbereitet für Schmetterling)
inkl. Gelenkwelle
inkl. Schwadblech
inkl. Drehzahlmesser
inkl. Ersatzmesser
Show original
New machine
Type:
Seco Duplex Standart 335 Heck
Working width:
335 cm
Year of construction:
2022
PDF specifications
Add to favourits
Christoph Brenner
Show telephone number
Show telephone number
Address verified
Phone verified
Phone verified
MEMBER SINCE 2003
Overall rating
Grundbichler Josef - Landmaschinen
Kellau 35
5431 - Kuchl
5431 - Kuchl
Reviews of the dealer
Overall rating:
12.07.2020
Rate dealer
More offers from this dealer
All ads of this dealer