The harvester is available from stock, it can be delivered instantly.
The SELECTA 3 incorporates the latest ALMA innovations: shaking, conveying, sorting, and steering. 50% less expensive than a self-propelled harvesting machine, it offers harvesting quality equivalent to a self-propelled machine with outstanding driving comfort.
The SELECTA 3.5, equipped with the berry lifter separator for a total abolition of the raid and the foreign body, the harvest can go straight into the vat. It associates with the table of separation, a system of unlockable berry lifter simple and strong.
Efficiency
Continuous control working speed of up to 7 km/h
Total bin capacity up to 3,000 L
Functions well in dense vegetation
High yield
Unmatched crop quality
Optimal collection around stakes
Protection of foliage (no shearing)
Practical
Minimum maintenance with easy access and secure to the zones to be cleaned
Hydraulic raising central ventilator to facilitate the access
Optimised for driving on the road : width 2,50 m
Bin emptying up to 3.1 meters
Easy headland turning with large offset angle
Cost-effective
50% less expensive than a self-propelled harvesting machine.
Save a table of sorting in cellar
Berry lifter separator
· The sorting table consists of a series of feeder rollers that separate the intact berries to bring down them in trucks without passing by the berry lifter. The clusters and the foreign body are managed in the helical berry lifter for the final sorting.
· 100 % of sheets are eliminated, as well as 100 % of the foreign body
De-stemming and sorting is done directly in the vineyard
Eliminates storage, transport, waste processing, and cleaning of equipment in the winery
Efficiency
Capacity of bins completely preserved
Working speed identical to a standard harvesting head
Lightest on-board destemming and sorting system on the market
the center of gravity is protected
Easy to handle
Auto-guidance in the rows
Work on side slope of up to 34 %
Suitable for all vineyards
Simple piloting
With the ergonomic joystick and the drive housing very compact, you can instantly set from the cab:
The conveyor front / back
The manual guide
Shaking
Tilt correction (right, left)
The correction of plate (front, back)
Emptying of bins
Drawbar steering
Hydrostatic transmission
This transmission immediately controls wheel movement when going up and downhill
Pump 300 bars and engine piston
The SELECTA 3.5 works on slopes with a gradient of up to 35%